hi all I have an MSI GT60, Nvidia GTX670 not DeTech, I want to ask, is this a VGA damaged or there is something else, thank before
Attached Files
-
-
Re: MSI GT60 Grafik not detech
Show us the bottom side of the board. Thanks -
Re: MSI GT60 Grafik not detech
problem solvedHidup yang benar2 membosankan.. hek that bak mita pengComment
-
Re: MSI GT60 Grafik not detech
What was wrong?Just cook it! It's already broken.Comment
-
Re: MSI GT60 Grafik not detech
nviddis likes to reball. why new chip?Comment
-
Hidup yang benar2 membosankan.. hek that bak mita pengComment
-
Hello Guys
I have a ASUS Rog strix laptop that I bought recently to fix and the previous owner spilled water on it . He brought it into a repair shop for them to check it out and instead of fixing it they damaged the battery connector of the laptop ! Other than that they damaged damaged nothing . But since the liquid damage the laptop only turns on and the keyboard lights up and then immediately turns off. I really want to repair this laptop and I also have experience in repairing phones etc and laptops and a bit of soldering but the diagnosing part is where I need help with and... -
Hi everyone,
I'm currently repairing a NEXIQ USB-Link 2 that was physically damaged due to crushing. After a thorough inspection, it appears that only one component is visibly damaged: the T5 component, located right next to the Mini-USB port.
It's a 4-pin SMD component, with one pin at each corner, aligned front-to-back along the USB port axis. Unfortunately, it is broken, and there are no visible markings left on the part to identify it.
I'm looking for help with the following:
The exact identification or part number of the T5 component
... -
Hello, I have an LG 50PA6500 Plasma TV, purchased new in 2012.
Unfortunately plasma is not working at all after a power spike.
Qucikly tested the PSU and voltages seems to be okay, when eveything is disconntected from the PSU I got:
VS = 200-206 / actual = 205 V,
VA = 55 / actual = 54.9 V,
M5V = 5.2 / actual = 5.19 V,
17 = 17.24 V,
5.2 = 5.19 V,
STDBY = 5.19 V,
ERROR_DET = 4.8 V - does it mean PSU is damaged? the rest of the voltages seems to be fine.
what's your opinion about the PSU?
Also I just... -
Hi everyone,
Sorry for the person who’s going to read all this !
I'm on a Nintendo Switch Lite, motherboard HDH-CPU-02.
While replacing the left joystick, I had to remove the motherboard to access the connector underneath. When I lifted the LCD connector latch, it broke (the plastic had become brittle over time), so I replaced the entire connector.
During the desoldering of the LCD connector using hot air, three small components located just below the connector (likely 0402 capacitors) came off and remained stuck to the bottom of the... -
Hey everyone, just wondering if this is a damaged screen or if there is possibly something else?...
Comment