Another hp 6930p

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Alfa is auto
    Senior Member
    • May 2013
    • 83
    • Finland
    #1

    Another hp 6930p

    Burn ic and it has on board markt q52 and cant read the chip(so well burnt)..any ideas?
    Tags: None
    • ktmmotocross
      Boardkiller
      • Feb 2014
      • 3580
      • slovakia
      #2
      Re: Another hp 6930p

      look at schematic

        Comment

        Previous template Next

        Related Topics

        Collapse
        • ttmi100x
          HANNSG Hi221 -- 2 secs to black feat. CCFL flicker & "burn" marks on power board
          by ttmi100x
          Greetings everyone,


          I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...


          The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
          Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.

          Upon closer inspection...
          "Burnt" resistor
          6 Photos
          07-31-2024, 06:36 PM
        • howardc64
          Insignia NS-43D420NA20 backlight on no display - LCD panel burn failure
          by howardc64
          Eventually discovered a burn mark near lower corner of LCD. Here is a summary
          • Backlight on, no image
          • Disconnect right buffer board (view from front), left side display comes on
          • Masked off pin 7+8 (both ~12,5v on both left and right buffer board) from t-con to right buffer board (view from front) display works but have some lines
          • Buffer board is pretty simple
          Removed the front bezel to examine edge of the glass. Found burn mark on lower right (view from front). Plastic bezel covering the burn mark region shows heat signature on the inside surface facing the LCD panel. Last 2 pics. Bright...
          07-11-2025, 04:04 PM
        • Seville
          Westinghouse TV WD48FAB100 Not Powering On – Burn Mark Found on Power Supply
          by Seville
          Hello all!

          Westinghouse TV WD48FAB100 Not Powering On – Burn Mark Found on Power Supply .

          I have a Westinghouse LED TV, model WD48FAB100 that is not powering on. Upon removing the back cover, I noticed a burn mark where the AC cord connects to the power supply/main board. In this model, there is only one board combining the two functions. Previous owner said the TV experienced a lightening strike, but who knows. I checked the main fuse, tested OK. Here are a collection of readings from the power supply ports. Looking for some guidance on what to test/check next....
          10-10-2022, 07:31 AM
        • dumbdd
          Sony VA panel burn in
          by dumbdd
          I have a Sony 75x940e that I just fixed with the help of the forum (bad emmc). For the last couple of months I was noticing some burn in of the android home icons on dark backgrounds (photo is attached). I always thought VA panels were immune to burn ins. Is there anything I can do to fix it? Could it be because of a failing component other than the panel itself?...
          07-19-2023, 09:23 PM
        • Document Archive
          HP EliteBook 6930p Laptop Schematic
          by Document Archive
          HP EliteBook 6930p Notebook Schematic
          07208-2...
          10-11-2024, 05:58 AM
        • Loading...
        • No more items.
        Working...