Need a new EC programmer

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • reformatt
    Badcaps Legend
    • Feb 2020
    • 1446
    • Australia

    #1

    Need a new EC programmer

    So I have a SVOD 3, which has served me well for many years. But I now find that there are newer EC's that aren't supported by it (like NPCE688PA0DX), and for that I have to buy a SVOD 4 instead. Confirmed this in the SVOD telegram group.

    Before I splash out and pay nearly $500 AUD for it, I was looking at the alternative Vertyanov Successor 50 programmer. But because their main store is located in Russia, it's impossible to buy one directly from them because of the sanctions. They did give me some others to contact but it all seems a bit dodgy. Sergey in the UK wants 300 Euro for it, that brings it to over $500 AUD. There was only one online store called Micropro, but the email given doesn't work. For such an expensive purchase, I'm not comfortable just transferring someone money in the hope they ship me a legitimate product.

    Is it worth all this hassle to try and get a Vertyanov or just stick with the SVOD 4? Would appreciate some others thoughts.
  • Akhlz001
    Member
    • Dec 2018
    • 31
    • United Kingdom

    #2
    Just get the SVOD 4, much better support and all around a much better product. I have used both last gen models while the Vertyanov is good the SVOD is just next level. I generally use a RT809H for unlocking and such as I deal with SOIC8/WSON8/SOP8 chips, for anything EC KBC related SVOD.

    Comment

    • reformatt
      Badcaps Legend
      • Feb 2020
      • 1446
      • Australia

      #3
      Thanks, you convinced me. I just ordered one directly off the SVOD store - it's the cheapest option out of everywhere else. Came in at just under $500 AUD (our exchange rate to the EURO is pretty poor right now). The Telegram channel has a lot of useful history there too, only just stumbled onto it.

      Couple of things troubled me about the Vertyanov. No direct means of purchasing it from the developer or an easy way to pay for it (because they are in Russia), no direct download link to the software, and you can only get into the Telegram channel once you have bought the programmer. So you have no idea what that is like until you've already got it. Might be a great product, but its harder to get a hold of than rocking horse poop.

      Comment

      • reformatt
        Badcaps Legend
        • Feb 2020
        • 1446
        • Australia

        #4
        One other thing I will add for others is the only site I found that you could order a Vertyanov online (apart from Aliexpress or Ebay) was one called Micropro.store. I sent them an email to their listed address on their website and this bounced. I asked about it to Vertyanov support and they aren't aware of them so this site might be a scam.

        Comment

        • mon2
          Badcaps Legend
          • Dec 2019
          • 14570
          • Canada

          #5
          Try Ebay:

          https://www.ebay.ca/sch/i.html?item=...&_ssn=micropro

          Then you will have the back up support from Ebay for all purchases. The above store ships out of Tunisia (with high grade olive oil).

          Comment

          Related Topics

          Collapse

          • c.daniel
            Vertyanov vs SVOD programmer
            by c.daniel
            Hi guys; i'm planning to buy EC programmer; what do you suggest is the best option, Vertyanov or SVOD?
            Or maybe you have another better option.
            Thankyou.
            01-11-2021, 04:55 AM
          • haithem
            Dealing with io controller using Vertyanov programmer
            by haithem
            Hello everyone ,
            I have vertyanov programmer . It work fine , but i have an issue with programming io , when i use an io from an other board .
            In my country , we cannot buy online new io clean .
            So we use io from faulty motherboard .
            After soldring the io , checked all pins are ok using microscope , the programmer cannot communicate and identify the io .
            For exemple , problem with asus x540ub and this issue is common with all asus motherboard , when i try to program the io inline , using io from faulty motherboard .
            Are there any trick to solve this...
            09-20-2022, 05:03 AM
          • STKR123
            The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
            by STKR123
            Greetings badcaps community,

            I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
            So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

            Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

            I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

            These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

            I learned that desoldering...
            10-29-2024, 06:03 AM
          • Teeheeze
            RT809H Programmer Firmware Corrupted
            by Teeheeze
            This is a shot in the dark, but I was just using my RT809H programmer and it got stuck in a certain state so I power cycled it. Now, the device LED just flashes quickly and does not connect to the software. I've tried to update the BIOS of it and it fails. I went so far as to remove the ROM from the programmer itself but it's some weird chip (I believe ATMEL, but I can't find any datasheet on it) so I've been unable to read the BIN from it w/ my other programmer. Chip has ATMLHC4C56BM CN written on it (I think). I'll upload an image. I have the programmer's BIN ready to program it manually. Anyone...
            02-13-2025, 04:51 PM
          • H34TO
            ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap
            by H34TO
            Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
            06-17-2025, 07:17 AM
          • Loading...
          • No more items.
          Working...