Hi guys; i'm planning to buy EC programmer; what do you suggest is the best option, Vertyanov or SVOD?
Or maybe you have another better option.
Thankyou.
Or maybe you have another better option.
Thankyou.
-
-
Re: Vertyanov vs SVOD programmer
So, after i do more search on forum, i came across this post
https://www.badcaps.net/forum/showthread.php?p=1007189
so, i'm gonna buy SVOD3.
-
Hello everyone ,
I have vertyanov programmer . It work fine , but i have an issue with programming io , when i use an io from an other board .
In my country , we cannot buy online new io clean .
So we use io from faulty motherboard .
After soldring the io , checked all pins are ok using microscope , the programmer cannot communicate and identify the io .
For exemple , problem with asus x540ub and this issue is common with all asus motherboard , when i try to program the io inline , using io from faulty motherboard .
Are there any trick to solve this...09-20-2022, 05:03 AM -
Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM -
Hello dear friends,
I download the software for the programmer T48 TL866-3G
my HP ProBook 430 G5 2VP86EA with
motherboard model: DA0X8BMB6F0 rev F and
BIOS CHIP model: 25B127DSIG BIOS
is showed there 4 times:
25B127DSIG @DIP8
25B127DSIG @SOIC8
25B127DSIG @WSON8
25B127DSIG @SOIC16
So I don't know which version should i choose if I used the test clip cable?
if I choose the wrong option, can it make damage to the chip or to one of the laptops while I used the test clip cable? because I have no experience in soldering.... -
This specification for the Acer TravelMate P2510-G2-M-54Q3 + Option Pack Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the P2510-G2-M-54Q3 + Option Pack boardview and P2510-G2-M-54Q3 + Option Pack schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...09-06-2024, 08:00 AM
-
This is a shot in the dark, but I was just using my RT809H programmer and it got stuck in a certain state so I power cycled it. Now, the device LED just flashes quickly and does not connect to the software. I've tried to update the BIOS of it and it fails. I went so far as to remove the ROM from the programmer itself but it's some weird chip (I believe ATMEL, but I can't find any datasheet on it) so I've been unable to read the BIN from it w/ my other programmer. Chip has ATMLHC4C56BM CN written on it (I think). I'll upload an image. I have the programmer's BIN ready to program it manually. Anyone...
Comment