Question about IC 25R128JV

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jocastillo
    New Member
    • Jan 2016
    • 6
    • México
    #1

    Question about IC 25R128JV

    I have a 0PDL board with a 25R128JV BIOS IC and a CH341 programmer, but I can't find the specific BIOS IC model in the programmer list. I read in some forums that selecting the 25Q128JV would allow me to read it, but it only reads FF . The question is, is it that the programmer doesn't support this IC or the information is corrupted?
    I have tried Asprogrammer, Neoprogrammer and CH341 programmer special edition, all the same result
    Attached Files
    Tags: None
    • mon2
      Badcaps Legend
      • Dec 2019
      • 14500
      • Canada
      #2
      https://winraid.level1techs.com/t/ch...-issue/96563/4

      select the JV version of the chip and test again. You have selected FV in the tool.

        Comment

        • jocastillo
          New Member
          • Jan 2016
          • 6
          • México
          #3
          In this programmer only have fv but in the others, neoprogrammer and ch341progeammer autodetect It as 25q128jv and only reads FF

            Comment

            Previous template Next

            Related Topics

            Collapse
            • SMDFlea
              How to add chip support to NeoProgrammer software for the CH341A Programmer
              by SMDFlea
              Adding chip support is quite easy,there`s even some instructions included with NeoProgrammer,although its not obvious where they are
              and once you do find them there`s a few crucial steps missing.

              Extract chiplist.zip to a folder,the instructions are in Import_EN.txt and in Import.xml .Its the xml file where we add the new chip.



              Open Import.xml with notepad or any other text editor.In this example i`m adding a Macronix MX77L25650F SPI_NOR chip.



              After adding the chip save the xml file and copy it to the root directory of the...
              05-26-2024, 07:15 AM
            • Sparklingx
              Everyone is buying the wrong CH341 programmer
              by Sparklingx
              Everyone is buying the wrong CH341A programmer, I have learned from my mistake. Don't buy the Black one or Green one.
              Buy this one in the photo. Most stable and all your common problems (reading but not writing/erasing, software hanging, disconnects after attaching chip, test cable connected but chip not found/ device disconnected) will be gone.

              Otherwise you'll have to solder capacitor from GND to VCC if you have those symptoms in your black or green miniprogrammer....
              09-11-2024, 02:03 PM
            • DynaxSC
              ASRock B650M PRO RS - BIOS CHIP 25Q256JW BLOCKED BY STATUS REGISTERS
              by DynaxSC
              Hi

              I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
              The SPI chip is an Winbond 25Q256JWEQ model (1V8).
              The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
              The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.

              I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6...
              08-04-2025, 12:20 PM
            • STKR123
              The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
              by STKR123
              Greetings badcaps community,

              I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
              So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

              Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

              I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

              These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

              I learned that desoldering...
              10-29-2024, 06:03 AM
            • dicky96
              CH341 Programmer - any good for 1.8V?
              by dicky96
              Hi guys
              I have a TL866 CS Eprom programmer and up until now it did everything I needed to do

              However for the first time I have come across a 1.8V Eprom and my programmer will not do 1.8V

              I need to program a 25Q64FWTG

              I could splash the cash and buy a V11.71 TL866II. These come with various attachments and the kit including a 1.8V adapter is either €62 with 12 adapters or €68 with 1 7adapters. I also have the option to buy just the programmer for €46.70, if I could get the 1.8V adapter separately and use the other eprom adapters from...
              01-31-2022, 06:14 AM
            • Loading...
            • No more items.
            Working...