I got a bare Dell Lattitude 5590 with missing battery, RAM, RTC battery and Storage, I wanted to put some components in it and use it as my home laptop. After adding a FRU 2GB DDR4 2400 SoDIMM RamaxelRAMI've tried booting Linux Mint from USB, I got an error while trying to boot it. I tried reseating the stick, different slot, didn't help.
I tried to boot Windows 10 installer, as that was the stock system my model came with, got a BSOD as soon as the installer started booting, different code every time. I've tried switching to AHCI mode, I've tried linux in legacy mode, I've tried compatibility mode, didn't work.
Motherboard:
LA-F111P
RAM:
FRU 2GB DDR4 2400 SoDIMM Ramaxel
CPU:
Intel Core i5-8350U Quad Core 1,7GHz
I attached the errors I was able to capture and motherboard model/ ram model
SYSTEM_THREAD_EXCEPTION_NOT HANDLED - FLTMGR.SYS
KERNEL_SECURITY_CHECK_FAILURE while booting to Dell restore drive
SYSTEM_SERVICE_EXCEPTION
Thank you for any help/advice. I want this laptop as my repair project and I hope it's fixable
I tried to boot Windows 10 installer, as that was the stock system my model came with, got a BSOD as soon as the installer started booting, different code every time. I've tried switching to AHCI mode, I've tried linux in legacy mode, I've tried compatibility mode, didn't work.
Motherboard:
LA-F111P
RAM:
FRU 2GB DDR4 2400 SoDIMM Ramaxel
CPU:
Intel Core i5-8350U Quad Core 1,7GHz
I attached the errors I was able to capture and motherboard model/ ram model
SYSTEM_THREAD_EXCEPTION_NOT HANDLED - FLTMGR.SYS
KERNEL_SECURITY_CHECK_FAILURE while booting to Dell restore drive
SYSTEM_SERVICE_EXCEPTION
Thank you for any help/advice. I want this laptop as my repair project and I hope it's fixable

Comment