clevo w370et miscellaneous capacitor.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gazel
    Member
    • Aug 2014
    • 11
    • uk

    #1

    clevo w370et miscellaneous capacitor.

    Hi all, I hope someone can help me here as I'm about to find a corner to cry in. Basically, I purchased a laptop second hand from ebay and when it came there was a rattle inside the laptop. So I opened it up thinking I was going to find some broken plastic or a screw and instead a miscellaneous solid state surface mount capacitor fell out.
    I decided to strip the laptop down to investigate where it has come from and it turns out there are a lot of places for capacitors on the board that are not being used so I am finding it near impossible to find out where this capacitor is from
    Can anyone give me any tips in locating where it came from? I have one place that I think is a possible candidate (right next to the graphics card in between 2 others) but the solder there is rounded as apposed to flat where as I presumed it would have been flat where the capacitor was mounted?
    I have searched for a picture online of the board and the issue is, there are a couple different types of board that have capacitors in the different locations (I presume it is to do with the region of the laptop).
    The laptop does work without the capacitor but I'm not happy with using it as I'm sure it would cause other damage.
    Can anyone help my strange predicament?
  • selldoor
    Slow Learner
    • Dec 2010
    • 7870

    #2
    Re: clevo w370et miscellaneous capacitor.

    You need to post a good clear picture of of the capacitors and pictures of both sided of your boards . Post using manage attachments jpgs less then 3mb.
    If it can not be read give all the information of the board number and mode off the board and off any bar code labels.

    Ask the seller?
    Please upload pictures using attachment function when ask for help on the repair
    http://www.badcaps.net/forum/showthread.php?t=39740

    Comment

    • gazel
      Member
      • Aug 2014
      • 11
      • uk

      #3
      Re: clevo w370et miscellaneous capacitor.

      yeah, I am in conversation with the seller atm and he is going to have the laptop back if I can't fix it ( I kinda wanted to fix it as I wanted the laptop). I'll try to get the pics up, I think the board is a Hannstar J MV-4 940V-0 1224.
      Thanks for the fast reply
      Attached Files
      Last edited by gazel; 08-03-2014, 04:28 AM.

      Comment

      • gazel
        Member
        • Aug 2014
        • 11
        • uk

        #4
        Re: clevo w370et miscellaneous capacitor.

        The third pic is where I thought it could be from but there are a lot of locations to choose from
        Sorry about the blurry pics btw, my camera on my phone isn't that great, I can try and take some pics with better focus if these ones are useless to you.
        Here is a pic of the capacitor:
        Attached Files
        Last edited by gazel; 08-03-2014, 04:51 AM.

        Comment

        • gazel
          Member
          • Aug 2014
          • 11
          • uk

          #5
          Re: clevo w370et miscellaneous capacitor.

          Ok, I took a clear picture of all the places the capacitor could go:

          The one above the gpu is the one I suspected (the 6th picture along) but the solder isn't flat there.
          Attached Files
          Last edited by gazel; 08-03-2014, 05:13 AM.

          Comment

          • selldoor
            Slow Learner
            • Dec 2010
            • 7870

            #6
            Re: clevo w370et miscellaneous capacitor.

            Did you discount PC161 - its right at the edge where it might get knocked and it looks
            a bit rough like it has been soldered?
            It will be a while before the US members get to look at it so someone may have this board. It is also often quiet on here at weekends

            In pic 3 looks like dust on the board and that extends over where a cap would have been so perhaps not there?
            Last edited by selldoor; 08-03-2014, 05:37 AM.
            Please upload pictures using attachment function when ask for help on the repair
            http://www.badcaps.net/forum/showthread.php?t=39740

            Comment

            • gazel
              Member
              • Aug 2014
              • 11
              • uk

              #7
              Re: clevo w370et miscellaneous capacitor.

              does the capacitor have to be the exact one as I need to purchase a new one?

              Comment

              • selldoor
                Slow Learner
                • Dec 2010
                • 7870

                #8
                Re: clevo w370et miscellaneous capacitor.

                Well it needs to be 560UF 2.5volts surface mount though you could use a through hole one
                if you cant find a surface mount

                Do you have another number near the memory slots like DAOZR7MB8F0 REV-F
                Last edited by selldoor; 08-03-2014, 06:12 AM.
                Please upload pictures using attachment function when ask for help on the repair
                http://www.badcaps.net/forum/showthread.php?t=39740

                Comment

                • gazel
                  Member
                  • Aug 2014
                  • 11
                  • uk

                  #9
                  Re: clevo w370et miscellaneous capacitor.

                  I can't see another number there no, just the Hannstar one. I don't think the capacitor has been knocked either I think it has gotten to hot and movement in the laptop has worked it loose although I'm not 100% sure.
                  The other issue I have is that if I do find where it's from then I'm going to have to find someone to do the solder as I don't have the equipment or experience.
                  Thanks for your help so far though, I really appreciate it
                  So you think as long as the cap is 560uf and 2.5v it should be fine?

                  Comment

                  • selldoor
                    Slow Learner
                    • Dec 2010
                    • 7870

                    #10
                    Re: clevo w370et miscellaneous capacitor.

                    RS have them http://uk.rs-online.com/web/p/products/7148840/

                    Just check the base size
                    Last edited by selldoor; 08-03-2014, 06:27 AM.
                    Please upload pictures using attachment function when ask for help on the repair
                    http://www.badcaps.net/forum/showthread.php?t=39740

                    Comment

                    • gazel
                      Member
                      • Aug 2014
                      • 11
                      • uk

                      #11
                      Re: clevo w370et miscellaneous capacitor.

                      thank you so much for finding that for me I really appreciate it (I really am very much a novice when it comes to these things)
                      Now back to finding out where it came from *rolls eyes*
                      Is there equipment that can be used to find where it came from or is going to be a visual thing?

                      Comment

                      • selldoor
                        Slow Learner
                        • Dec 2010
                        • 7870

                        #12
                        Re: clevo w370et miscellaneous capacitor.

                        No there is no machine.
                        You could try emailing clevo - long shot.
                        As your board is working you could test the voltages on the pads that would
                        mean you could disregard any over 2.5v
                        We can continue tying to find a picture or a schematic for the board.
                        If you can find anyone selling one on ebay you can try asking them - may or may not want to tell you

                        Have you googled the numbers on the Ram I cant read them may be just the ram part number?
                        Take the ram out any label underneath - there is usually another number than the board number. Is that a label on the back of the board on the back of the ram section?
                        No comment yet from any of the laptop gurus spread around the world if nothing comes up today post something in the thread as late today as possible.
                        Please upload pictures using attachment function when ask for help on the repair
                        http://www.badcaps.net/forum/showthread.php?t=39740

                        Comment

                        • gazel
                          Member
                          • Aug 2014
                          • 11
                          • uk

                          #13
                          Re: clevo w370et miscellaneous capacitor.

                          Thanks again for your help mate

                          I've just found this:
                          http://www.nhl.pl/lofiversion/index.php/t63766.html

                          If you scroll down to the the picture where the heat sink cover is open you can see there are 3 capacitors above the gpu (with the same volt caps) and only 2 on mine. When I inspect the area on my board the gloss of the board is dull there and looks like theirs been some heat discoloring.
                          If I use a volt meter there would should I be looking for?

                          btw my capacitor is 6mm base diameter.

                          Comment

                          • selldoor
                            Slow Learner
                            • Dec 2010
                            • 7870

                            #14
                            Re: clevo w370et miscellaneous capacitor.

                            WoW!! great find.

                            Check your base size again - I believe they are usually standard the one I
                            suggested looks to be 8mm across the base

                            EDIT EDIT

                            OK found this one 2R5SVPC560M

                            its available from a few places - initially found it on ebay but we dont usually recommend ebay
                            as there are a lot of fake caps about
                            Last edited by selldoor; 08-03-2014, 08:42 AM.
                            Please upload pictures using attachment function when ask for help on the repair
                            http://www.badcaps.net/forum/showthread.php?t=39740

                            Comment

                            • selldoor
                              Slow Learner
                              • Dec 2010
                              • 7870

                              #15
                              Re: clevo w370et miscellaneous capacitor.

                              RS have them but you have to buy 5 and I havent looked at postage
                              They have acounter in Birmingham if you are anywhere near?
                              http://uk.rs-online.com/web/p/alumin...itors/7955310/
                              Please upload pictures using attachment function when ask for help on the repair
                              http://www.badcaps.net/forum/showthread.php?t=39740

                              Comment

                              • gazel
                                Member
                                • Aug 2014
                                • 11
                                • uk

                                #16
                                Re: clevo w370et miscellaneous capacitor.

                                cheers mate, I'm gonna ring round tomorrow and see if I can find someone to do the solder.
                                Thanks for your help again, you made my day
                                I'll let you know how I get on.
                                Last edited by gazel; 08-03-2014, 09:19 AM.

                                Comment

                                • gazel
                                  Member
                                  • Aug 2014
                                  • 11
                                  • uk

                                  #17
                                  Re: clevo w370et miscellaneous capacitor.

                                  I have the new capacitor (I ordered the one you linked me to) and I am taking the board to a guy I found who will do the soldering while I watch and isn't charging me a lot (he seems like a real nice guy).
                                  I'd like to thank you again selldoor, as without you I would still be getting frustrated with this laptop.
                                  Thank you so much

                                  Comment

                                  • selldoor
                                    Slow Learner
                                    • Dec 2010
                                    • 7870

                                    #18
                                    Re: clevo w370et miscellaneous capacitor.

                                    You are very welcome - you found the main clue yourself
                                    Hope it gives you years of service.
                                    Please upload pictures using attachment function when ask for help on the repair
                                    http://www.badcaps.net/forum/showthread.php?t=39740

                                    Comment

                                    Related Topics

                                    Collapse

                                    • Tynan Dill
                                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                      by Tynan Dill
                                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                      Upon bringing it home and plugging it up, it showed a standby light.

                                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                      Assuming...
                                      11-22-2024, 01:46 PM
                                    • m1ch43lzm
                                      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                                      by m1ch43lzm
                                      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                                      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                                      05-12-2025, 08:37 PM
                                    • Hakuu
                                      LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                                      by Hakuu
                                      Hi There,

                                      This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                                      After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                                      More Details

                                      TV Model - LG OLED77G1PUA

                                      Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                                      07-12-2023, 02:37 PM
                                    • jb_Bak
                                      Sony xbr-65x900c main board issues?
                                      by jb_Bak
                                      Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                                      Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                                      Power Board Connector that goes to Main board
                                      CN6401
                                      Pin 01 NC
                                      Pin 02 NC
                                      Pin 03 "BL_ON": 0V
                                      Pin 04 "N/C"
                                      Pin 05 "STBY 3.3V": 3.5V
                                      Pin 06 "GND": N/C
                                      Pin 07 "AC_OFF"...
                                      09-27-2021, 04:52 PM
                                    • canadaboy25
                                      Panasonic TC-P54VT25 No image. A or D board?
                                      by canadaboy25
                                      I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

                                      The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

                                      I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
                                      01-17-2021, 01:06 AM
                                    • Loading...
                                    • No more items.
                                    Working...