At first, backlight would be really sensitive, sometimes you have to apply pressure to the bottom left of screen for backlight to be on, sometimes it will stay on but if desk is bumped it will go off. Eventually it stopped all together, disconnected battery, pulled the bezel off and disconnected the screen, then removed the protective film around the lcd board. During board inspection there was a resistor that was barely attached to only one pad, a tiny amount of force with tweezers got this to move completely off, and unfortunately too far away as it is now lost.. I don't know if this is the only issue though, I don't know what would cause such absurd behaviour.. I do not know what this resistor is, and hope that someone has some details about the attached screen - a schematic would be awesome
Attached Files
Comment