HP dv9500 hangs on win7 logo !!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SM-Piyes90
    Senior Member
    • Feb 2014
    • 120
    • Morocco
    #1

    HP dv9500 hangs on win7 logo !!

    Hello everyone in here .

    I have an old laptop dv9500 model running windows 7 , before i experience this problem , i was having a graphics problem due to bad GPU BGA solder , after that i was still working with it by disabling the GPU , and working with a poor but stable factory resolution .

    Now when i power it on , it stays on the windows logo screen , so i took it to a BGA reflow service in the hope that reflowing the GPU would fix the problem , but it still persists , even after trying another HDD .

    Is anyone familiar with this problem ?
    Could the BIOS be involved or the GPU ?
    Last edited by SM-Piyes90; 03-14-2014, 08:34 AM.
    Tags: None
    • lefos
      Badcaps Veteran
      • Nov 2013
      • 321
      • Greece
      #2
      Re: HP dv9500 hangs on win7 logo !!

      Have you tried any other OS? You can try with a live linux cd.
      It might be from the gpu as you are describing it.

        Comment

        • Th3_uN1Qu3
          Believe in
          • Jul 2010
          • 6031
          • Romania
          #3
          Re: HP dv9500 hangs on win7 logo !!

          The GPU went bad completely. Replacement is the only solution.
          Originally posted by PeteS in CA
          Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
          A working TV? How boring!

            Comment

            • RJARRRPCGP
              Badcaps Legend
              • Jul 2004
              • 6304
              • USA
              #4
              Re: HP dv9500 hangs on win7 logo !!

              Originally posted by SM-Piyes90
              Hello everyone in here .

              I have an old laptop dv9500 model running windows 7 , before i experience this problem , i was having a graphics problem due to bad GPU BGA solder , after that i was still working with it by disabling the GPU , and working with a poor but stable factory resolution .

              Now when i power it on , it stays on the windows logo screen , so i took it to a BGA reflow service in the hope that reflowing the GPU would fix the problem , but it still persists , even after trying another HDD .

              Is anyone familiar with this problem ?
              Could the BIOS be involved or the GPU ?
              Being an HP, the CPU may have failed.
              ASRock B550 PG Velocita

              Ryzen 9 "Vermeer" 5900X

              32 GB G.Skill RipJaws V F4-3200C16D-32GVR

              Arc A770 16 GB

              eVGA Supernova G3 750W

              Western Digital Black SN850 1TB NVMe SSD

              Alienware AW3423DWF OLED




              "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

              "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

              "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

              "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747

                Comment

                • SM-Piyes90
                  Senior Member
                  • Feb 2014
                  • 120
                  • Morocco
                  #5
                  Re: HP dv9500 hangs on win7 logo !!

                  Ok i got the picture .

                  Thanks to all of you.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • theone111
                      Problem with LG Plasma 60PM6700 - Random power downs
                      by theone111
                      I have an LG Plasma TV 60PM6700 for the past ~12 years.

                      In the last ~3-4 months I have been having some issues.
                      1. Problem: It started with random picture disappearing (sound still worked).
                        Frequency: Happened about once a week.
                        Solution: Had to turn off TV wait a few seconds before turning it on again.
                      2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                        Frequency: Happened about once a week.
                        Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                      3. Problem: TV shuts down
                      ...
                      1 Photo
                      07-22-2024, 10:36 AM
                    • MICHAEL_2013
                      Change Logo Aptio Setup Utility 2021 (ROM Layout mismatch detected) Problem
                      by MICHAEL_2013
                      Good afternoon, Lords of great wisdom. My problem is the following: I bought a Chinese laptop with GN117_MB_V31-T board. (Aptio Setup Utility 2021) (There is no info for that board). And I want to change the logo of the bios. I have used Aptio_V Afuwin to do the bios Backup, then I change the logo with AMI ChangeLogo Tool v5.0.0.2 and everything seems perfect. But when you restart the new logo appears ok. But it automatically enters the bios, appearing a new option RECOVERY, ROM LAYOUT MISMATCH DETECTED - PARTIAL UPDATE IS NOT ALLOWED. If I give ESC it enters windows without problem but always...
                      06-28-2021, 03:12 PM
                    • letmealone
                      Smart Tech LE-4048SA stuck at SMARTTV logo: problem solved.
                      by letmealone
                      I had this tv set, stuck at the 'SMARTTV' screen with coloured logo. Impossible to find the original Smart Tech firmware, so i searched in kazmielec.tech some firmware compatible with the tv-set hardware (CV338H-T42 card and Y400HJ6.PE1 screen). The firmware i tried was wrong and it bricked the TV, just showing a black screen and not entering stand by anymore. I supposed it needed special hardware to reflash the NAND, but i was wrong, it just needed a working compatible firmware. Still in the kazmielek page i tried ' CV338H-T42_1920x1080_Telefunken TF-LED43S81T2' and it finally worked. I wrote...
                      09-16-2024, 10:03 AM
                    • Teban1306
                      [REQUEST] ThinkPad T14 Gen 1 (20S1) - Custom Boot Logo Modification
                      by Teban1306
                      [REQUEST] ThinkPad T14 Gen 1 (20S1) - Custom Boot Logo Modification

                      Hello everyone!
                      I hope this is the right section for this request. I'm looking for help to modify the boot logo on my ThinkPad T14 Gen 1.
                      System Information:
                      • Model: Lenovo ThinkPad T14 Gen 1
                      • Machine Type: 20S1S4E600 (Intel i7 variant)
                      • Current BIOS: N2XET42W (1.33) - Latest version
                      • BIOS File: n2xuj25w.exe (12.98 MB) - Downloaded from Lenovo support
                      What I'm trying to achieve:

                      Replace the default "LENOVO" boot logo with a custom image during POST.
                      🔧 What I've tried:
                      • [
                      ...
                      09-14-2025, 11:49 AM
                    • eduwins
                      Dell Inspiron15 5000 , stuck on logo ,Bios problem
                      by eduwins
                      can someone help me to fix this bios, stuck on dell logo,i7 11th gen....
                      11-27-2023, 04:38 AM
                    • Loading...
                    • No more items.
                    Working...