A2141 Jack audio issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kurtspirit
    Senior Member
    • Feb 2019
    • 112
    • France
    #1

    A2141 Jack audio issue


    Good morning,
    I have a problem with a Macbook A2141 with the audio jack port. Sound only comes out from one side (left). The right one just emits a kind of crackling sound.

    I changed the jack ports twice to be sure that it was not caused by a defective part, but the result was the same.

    I have the impression that it could be an audio filter or component but I am unable to locate the affected part on the motherboard.
    Have you ever encountered a similar problem and can you help me find the filters, if they exist, on the map please?

    Thanks in advance

    Jonathan
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • samson7point1@yahoo.com
      Help troubleshooting an audio problem with an RCA SGT-250 CED Player
      by samson7point1@yahoo.com
      The Problem: This player has a toggle switch to select between Stereo, Mono R, and Mono L. Regardless of the setting it outputs the sound to both the L&R audio jacks. In the Mono R position, the audio output level is normal (from both the L and R audio output jacks), in the Stereo position the audio output is about half the volume, and in Mono L, it's about 3/4 the volume. Something about putting it into Stereo mode is causing the volume to drop significantly and I can't figure it out.

      The player processes the audio signal using two different reference frequencies. The "R"...
      PW300S circuit diagram
      2 Photos
      04-30-2024, 11:22 AM
    • ChaosLegionnaire
      what i went through dealing with my mobo with dead onboard sound!
      by ChaosLegionnaire
      so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

      i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
      09-13-2022, 09:02 AM
    • Stephen
      A2141 MacBook Pro 16" lid sensor issue.
      by Stephen
      Just like the title states. I have been confused at this point. Computer won't turn on when lid angle sensor is plugged in, when unplugged it turns on immediately, however I have tried 4 different lid angle sensors all OEM and calibrated without issue. I even pulled one from a donor computer and still nothing. I know the M1 Pro sensors are married to the board however I do know the 2019 intel are not as long as they came from a donor LCD etc. What I do not get is why is the lid angle sensor forcing the computer to not turn on, another issue I see when the lid angle sensor is disconnected...
      11-01-2024, 03:45 PM
    • Stephen
      A2141 Weird Issue But works
      by Stephen
      Got an A2141 MacBook Pro 16" computer turns on however the track pad clicks but the keyboard has no life, NO LIQUID DAMGE whatsoever. Trackpad does click but the OS loads but the trackpad won't move the cursor, the keyboard is unresponsive. I replaced the cable and the trackpad to see if that was the issue but it was not, I went to see if the CAPS LOCK would turn on but it does not. Any indication what this is? I went and tested the lid sensor but nothing else. Battery holds a charge, fans spin normally, and lcd is good. I can use external mouse and keyboard without issue....
      05-06-2025, 10:23 AM
    • cheebster
      MacBook Pro 2019 A2141 820-01700 NAND Issue Stuck in DFU
      by cheebster
      MacBook Pro 2019 A2141 820-01700 NAND Issue Stuck in DFU

      Ok, here's an issue ive got on a A2141 820-01700 MBP 16' 2019. No signs of life, 5.06v 0.0a on usb-c meter, on each 4 usb-c ports.

      Nand voltages are missing.

      I've found no shorts at all so far, no signs of heat via thermal camera either.

      PPBUS_G3H 12.31
      PP3V3_G3H_RTC 3.387v
      PP3V3_G3H 12.31v
      PP2v5_NAND_SSD0 0v 58 ohms
      PP2v5_NAND_SSD1 0v 57.8 ohms
      PP1v8_SLPS2R 1.8v
      PP1v1_SLPS2R 1.1v
      P3V3_G3H_SOCPMU 3.37v
      PP0V9_SLPDDR 0.9v...
      10-11-2023, 11:31 AM
    • Loading...
    • No more items.
    Working...