Announcement

Collapse
No announcement yet.

Led White screen problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Led White screen problem

    I have a NCL50 - LA-6121P(hannstar) motherboard. Lcd data cable was broken. So i fixed cable and checked with multimeter. Then i attached the cable and powered motherboard. Led panel is full white but external display is ok. I ordered new cable but still same. I tried with 3 different led panels but nothing changed.
    Take a look.





    #2
    Re: Led White screen problem

    Have you checked for any fuse?

    Comment


      #3
      Re: Led White screen problem

      Yes. All seems ok. I didnt check the fuses on the panel becuse i tried 3 different panel but all of them showing white.

      Comment


        #4
        Re: Led White screen problem

        just check if you get 3.3v at +LCDVDD. Without this voltage, you will only see white screen.
        Last edited by whaldsz; 02-07-2014, 07:09 AM.

        Comment


          #5
          Re: Led White screen problem

          Originally posted by whaldsz View Post
          just check if you get 3.3v at +LCDVDD. Without this voltage, you will only see white screen.
          I hardly found schematic then i found +LCDVDD pins. Voltage is showing 2.08V. Any ideas?

          Update :

          When i removed the cable , lcdvdd pins are giving 3.3V. I think this new cable is broken too.
          Last edited by lgf700b; 02-17-2014, 08:26 AM.

          Comment


            #6
            Re: Led White screen problem

            Had this one the earth screening that runs in the cable is broken.

            Comment


              #7
              Re: Led White screen problem

              Had experienced already that sometime VGA chip causes this problem even external display from VGA out is OK.

              Comment

              Working...
              X