Announcement

Collapse
No announcement yet.

Tablet lenovo tb-x103f

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Tablet lenovo tb-x103f

    Hello

    Doesn't just start the screen goes on and off
    Home screen Empty battery with plug shows nothing more happens
    over 3.0 volts dancing
    Thank you
    Last edited by samtron786; 12-06-2023, 04:50 PM.

    #2
    You need more than 3 volts in the first place check your battery voltage if is that low it needs to about 4.something volts to be considered fully charged it could be a battery issue or a charging issue

    You need to go into more details about what it is doing exactly and post some pictures of the screen if possible

    One possible solution is to disconnect the charging cable and push the power button for 30 seconds then hook up the charging cable an see if it resets it to start charging again you should see a battery icon in red and it might not boot until it has enough voltage on the battery to boot up and work correctly if you get this leave it in off position until it power on by itself or very quickly push the power button to see the state of charge and it is not red anymore

    One thing if possible take a picture of the battery and the battery power leads

    It would be helpful if you had a USB doctor that has a voltage and current meter on it to know if the tablet is charging the battery or not

    or

    Google how to do a hard reset for this tablet and follow the directions and see if that helps or not

    My son has a tablet from where he works and let the battery get so low that it was in a rebooting cycling mode and I did what I suggested above about one possible solution
    Last edited by sam_sam_sam; 12-09-2023, 03:02 AM.
    9 PC LCD Monitor
    6 LCD Flat Screen TV
    30 Desk Top Switching Power Supply
    10 Battery Charger Switching Power Supply for Power Tool
    6 18v Lithium Battery Power Boards for Tool Battery Packs
    1 XBox 360 Switching Power Supply and M Board
    25 Servo Drives 220/460 3 Phase
    6 De-soldering Station Switching Power Supply 1 Power Supply
    1 Dell Mother Board
    15 Computer Power Supply
    1 HP Printer Supply & Control Board * lighting finished it *


    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
    2 Hem Saw Computer Stack Board

    All of these had CAPs POOF
    All of the mosfet that are taken out by bad caps

    Comment


      #3
      Hello, I have marked the location in the picture
      I have 1x 2x 3 full flashes here and doesn't stay stable. It's in motion
      the battery is not charging
      Thank you

      Comment


        #4
        I also changed the power adapter and cable, unfortunately that didn't help

        Comment


          #5
          Another question, is there a circuit diagram for it?
          Attached Files

          Comment


            #6
            Originally posted by samtron786 View Post
            Another question, is there a circuit diagram for it?
            Post your request in the "Schematic requests ONLY!" sub forum -> https://www.badcaps.net/forum/troubl...-requests-only .Include the motherboard model number
            All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

            Comment


              #7
              Good afternoon, thank you
              Model: A6505_PK85a is
              2917 H103C

              Comment

              Working...
              X