ipad 2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • innocentforeign
    innocentforeign
    • Jun 2013
    • 172
    • KSA

    #1

    ipad 2

    hi friends

    i have an i pad2 after update ios 7 not working now unable to connect with i tunes not hard resetting just still apple icon you can see in attached pic



    any suggestions ?


    thank you
    Attached Files
  • gabik111
    ORD spotter
    • Apr 2011
    • 142
    • USA / Poland

    #2
    Re: ipad 2

    Be sure that is home button is working. Try to get in DFU mode when connected to computer.
    Laptops and computers repair.

    Comment

    • whaldsz
      Badcaps Veteran
      • Apr 2013
      • 395
      • Philippines

      #3
      Re: ipad 2

      try pressing POWER and HOME buttons at the same time to power of your ipad.

      Possibly your ipad was jailbroken then you update to IOS 7? If so, you need to go to DFU Mode then restore through Itunes.

      Comment

      • innocentforeign
        innocentforeign
        • Jun 2013
        • 172
        • KSA

        #4
        Re: ipad 2

        thank you . u both for reply

        in DFU mode working.. ipad not jailbroken . if i restore coming ios 7 and ios 7 not working, how can i install old version or other way to solve this problem

        Comment

        • whaldsz
          Badcaps Veteran
          • Apr 2013
          • 395
          • Philippines

          #5
          Re: ipad 2

          You cant restore from previous version of ios unless your ipad is jailbroken and you have shsh blobs on cydia.

          Comment

          Related Topics

          Collapse

          • GeirAndersen
            iPad .pcb file collection
            by GeirAndersen
            I tried searching the forum for whether this has been uploaded already, but couldn't find them (as a collection).
            Here's a dump of a bunch of iPads, I've split into 2 archives to get under file limit

            IPAD COLLECTION 1
            +---iPad mini1 820-3400(A1432) 820-3243(A1454?A1455)
            +---iPad mini2 820-3683(A1489) 820-3684(A1490?A1491)
            +---iPad mini3 820-00008(A1599) 820-00002(A1600)
            +---iPad mini4 820-00180(A1538) 820-00177(A1550)
            +---iPad mini5 820-01591(A2133) 820-01495(A2124?A2125?A2126)
            +---iPad Pro 12.9-4-820-01797(A2229) 820-01798(A2069?A2232?A2233)...
            12-09-2024, 09:28 AM
          • grimacelord
            Apple iPad Pro 3rd Generation 12.9" (A1876) No Power/Charge When Screen Is Connected
            by grimacelord
            Hello.

            Working on an Apple iPad Pro 3rd Generation 12.9" that has a weird issue. When the display is NOT connected, the iPad will charge and power on normally. I know it's on because I can hear notification sounds and the charging notification sound.

            If I connect a brand new display to the logic board, the iPad will not turn on at all. When I connect the iPad to an 18W wall charger and a USB-C ammeter, I can see that the iPad is attempting to charge, but constantly "resets" after just a moment or two.

            For example, when I connect the iPad to...
            04-15-2022, 11:06 AM
          • trepachka
            iPad Air A1475 Boot loops after replacing battery
            by trepachka
            This iPad was working fine except the battery was not holding charge for more than 40 minutes. I replaced it with a new battery. I haven't glued the battery yet, just inserted it into the slot and held it with battery screw.

            The iPad was powered on with the new battery and I am getting white screen with Apple logo for about 10 seconds, then the screen turns dark. It then cycles like this forever.

            I know the battery is working because the iPad continues to boot loop without the charger until it depletes to 0% and the message displays I need to plug in the charger.
            ...
            11-08-2024, 03:17 PM
          • ipatch
            ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
            by ipatch
            i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
            08-24-2024, 02:36 PM
          • SarcasticOP
            iPad Pro 12.9 (6th Gen) screen shuts off after unplugging device
            by SarcasticOP
            Greetings,

            I have an iPad Pro 12.9" 6th gen tablet that had a screen replaced about 10 months ago at a repair shop and last week the screen went blank during use. The device was still on, notifications played sound for example. I have replaced the screen twice, both screens are working until I unplug it, at which point I can see that screen is on but is all black. If I press the power button, the backlight goes off, and when I press it again, the image appears for half a second and then the screen goes back to being black but on. This issue is not present at all when the iPad...
            10-24-2024, 11:55 AM
          • Loading...
          • No more items.
          Working...