Similar mosphet proposal? - Badcaps

New Members Please consider donating to this site if it has helped you. We rely on these donations. Please also introduce yourself here Introduce yourself here. And finally, Read the Forum rules here.

X

BenCesur

Member

Join Date: Jun 2011

Posts: 35
#1

Similar mosphet proposal?

12-11-2011, 03:08 PM

Friends can not find on the market have two mosfet. Can you recommend different products which will be used instead of these products?

First: AOD403 30 V 70A P-Channel Mosfet..
Second: FR3709ZC 30 V 86 A Power MOSFET

Yes, gentlemen. What do you recommend?

Product covers the following way:
Attached Files
Tags: None
gabik111

ORD spotter

Join Date: Apr 2011

Posts: 142

Country: USA / Poland
#2

12-11-2011, 05:13 PM

Re: Similar mosphet proposal?

I know I'm missing the answer but what about this :
http://parts.digikey.com/1/parts/150...52-aod403.html
http://www.goodluckbuy.com/fr3709z-t...rd-repair.html

Last edited by gabik111; 12-11-2011, 05:16 PM.

Laptops and computers repair.
Comment
BenCesur

Member

Join Date: Jun 2011

Posts: 35
#3

12-12-2011, 11:45 AM

Re: Similar mosphet proposal?

Originally posted by gabik111

I know I'm missing the answer but what about this :
http://parts.digikey.com/1/parts/150...52-aod403.html
http://www.goodluckbuy.com/fr3709z-t...rd-repair.html

I can not find this product in Turkey. If China does not make sense cause to bring.
Comment

Previous template Next

How do you test MOSFET in laptops ?

by Jane

I tried to use this method:

Testing an N-channel MOSFET:

Step 1: Discharge the Gate (turn off the MOSFET)
Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.

Step 2: Charge the Gate (turn on the MOSFET)
Now, place the red probe on the Gate (G) and the black probe on the...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
09-27-2024, 03:31 AM
VGA MOSfet permanently shorted and loss of MOSfet pad

by Nooy

Hello everyone, I recently found this badcaps site and super Learn Electronics Repair youtube channel. And I wanted to learn how to troubleshoot power supplies and VGA cards and how to practice soldering, since I already have a properly defective piece of them. I am currently trying to solve two problems:

I have a Gigabyte GV-RX460WF2OC-4GD type card. I managed to find the faulty MOSfet (AON6414A) on it, which I replaced. The card starts up, but after about half a minute, the MOSfet in the same position will be shorted again. Is it possible that the PWM controller driving the MOSfet...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
02-14-2024, 02:26 AM
Help identifying mosfet on Razer Blade RZ09 (CH570_MB_NT)

by redbaron1007

I have a Razer laptop (RZ09 MB# CH570_MB_NT) that has a shorted mosfet marked BND M03 E067 that I'm unable to find anywhere online. Does anyone either know what the part number is for this mosfet or have a schematic I can find it in?

Backstory on the whole thing the laptop was plugged into a lamp at a hotel. The lamp got unplugged while it was charging and now the system won't power on anymore. I found the caps around this mosfet shorted and when I injected voltage into the caps the mosfet got hot and my bench psu was pulling 5A. Pretty sure this is all that's wrong with the laptop...

1 Photo
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
09-09-2025, 11:10 AM
Asus X712EA 3 volts after the first mosfet

by AppleLover123

Hey guys,

i have a asus motherboard here and as the title says after the first mosfet (in the picture) there is nothing more than 3.15v.
I injected 19v and max. 1 amp at the charging port and there is not voltage drop or smth. It's just taking 19v and 1 milliamp.
Then i tried to inject 19v and max 1amp after the current sensor and there it first takes 19v and 4 milliamps and after 2 seconds it is taking nothing (no current).
I measured on the coils on board everything seems fine. Also the main power rail is not shorted (infinite resistance).
Now i thought something...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
12-15-2024, 07:49 AM
Asus GA502D keeps blowing mosfet

by Scotchmist

I have an Asus GA502D, it had a blown mosfet which I replaced and the laptop booted into windows, a few mins later it shut off, the same mosfet was blown. I thought maybe just a bad mosfet but same thing happened again, a few mins in windows and shuts off.

I have removed the mosfet and can run the laptop no problem

The MOSFET is FDPC5018SG

Can anyone point me in the direction of what could be the cause of this, could it be the controller rt3663bc?

Thanks
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
08-24-2024, 02:23 PM
Loading...
No more items.

Working...