Announcement

Collapse
No announcement yet.

Hp ZBook Not turning On / charging led blinking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Hp ZBook Not turning On / charging led blinking

    HP Zbook 14U G5 not turning on. When dc connector is connected charging light flashes a solid white light blinking with 5-6 amber lights. Then restart again with no white only continuous amber light but no battery connected. Power supply load taking only 20-30 map. all standby voltage present.

    No schematic found.
    Last edited by shakib200; 11-17-2023, 11:55 AM.

    #2
    Re: Hp ZBook Not turning On / charging led blinking

    What voltage you get at the source, drain, and gate of the first two MOSFETs? Also, what is the charger IC and SIO chip?

    Comment


      #3
      Re: Hp ZBook Not turning On / charging led blinking

      1st mosfet drain & source 20v, gate 6.8v. 2nd mosfet drain & source 20v, gate 18.9 v

      Comment


        #4
        Re: Hp ZBook Not turning On / charging led blinking

        Charging ic intersil 9538H, SIO Novoton npce797H

        Comment


          #5
          Re: Hp ZBook Not turning On / charging led blinking

          This is likely NVDC design. Do you have the Main power rail present and 3.3V, 5V and maybe even more present at the coils? 30ma is already a lot.

          And share board number please
          FairRepair on YouTube

          Comment


            #6
            Re: Hp ZBook Not turning On / charging led blinking

            3V, 5V, 1V, 12V, 1.8V present. 3.3 V present on power button. But when pressed only 20-30 mAp load and not turning on.
            Motherboard part number : COMPUTRO 6050A2945601-MB-A01

            Comment

            Working...
            X