MacBook A1707 favor needed.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Robin21
    Member
    • Feb 2021
    • 45
    • the Netherlands
    #1

    MacBook A1707 favor needed.

    Hello,

    I'm replacing NAND (Upgrade 256GB to 1TB) and need a favor from someone who have this motherboard – 820-00928. I haven't checked resistant to the ground before replacing chips and after I've placed new chips I've notice low resistance on L9370 (number 1 on my attached picture) next to the U9310 (S2FPS04X01). 0,3 - 0,2 Ohm.

    If someone will be so kind and could check this resistance I'll be pleased.

    Thank you in advance!
    Attached Files
    Last edited by Robin21; 08-13-2023, 05:03 PM. Reason: I forget to add attachments.
    Tags: None
    • Robin21
      Member
      • Feb 2021
      • 45
      • the Netherlands
      #2
      Re: MacBook A1707 favor needed.

      Hi,

      It was shorted SDD controller. I haven't touched it during replacing SSD chips around and glue was still there. It seems glue is changing its capacity during heating. When I've removed it there was a mess under it. Now I have high resistance on that coil, and I've measured 1,2V. But replacing SSD's wasn't success. M/B works, but there is no disk..

        Comment

        • piernov
          Super Moderator
          • Jan 2016
          • 4435
          • France
          #3
          Re: MacBook A1707 favor needed.

          There are strapping resistors and the SSD controller for 1TB/2TB configurations has more RAM.
          Attached Files
          OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

            Comment

            • Robin21
              Member
              • Feb 2021
              • 45
              • the Netherlands
              #4
              Re: MacBook A1707 favor needed.

              Originally posted by piernov
              There are strapping resistors and the SSD controller for 1TB/2TB configurations has more RAM.
              Thank you Piernov. I'll try that. Still have SSD Controller.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • leonemax81
                  Macbook a1707 820-00281 Battery no Power
                  by leonemax81
                  Hi guys I have a Macbook a1707 with motherboard 820-00281, without liquid damage that behaves strangely, with the battery connected the Macbook does not turn on and the USBC meter stops at 5v in loop, when I disconnect the battery the Macbook turns on and works fine, I have already tried to replace the battery twice without success, as soon as I connect the black cable of the battery the Macbook does not turn on, it stops at 5v and in loop.
                  08-23-2024, 09:24 AM
                • sofles
                  Macbook a1707 2017 model 820-00928 GPU issue
                  by sofles
                  Hello there

                  I have problem with Macbook Pro 15" 2017, model 2017, MB code 820-00928.

                  I bought it as broken with some artefacts on the screen, first I thought that this is problem with ribbon cable but after inspectiing ribbon cable I know it is fine. I tried to reinstall macOs and then I figured out that this must be something with GPU as installation freezes at the end (when drivers are loaded). I installed Windows and was able to install every each of drivers except GPU driver, as soon as I tried to install GPU driver - black screen and restart.

                  ...
                  11-21-2024, 05:25 AM
                • tommy97
                  Apple MacBook A1707 No Audio/Sound
                  by tommy97
                  Hi,

                  I'm having an issue with an A1707 MacBook Pro—there's no audio output. Initially, the MacBook came in with a no-power problem, and I found a faulty U6400, which I've now replaced. The laptop now powers on, but there's still no sound.

                  I've also replaced U6300, but the problem persists.

                  Here are the current voltage readings:
                  • PPV18_S0: 1.8V
                  • R6402: 1V
                  • R6405: 1V
                  • R6403: 1V
                  • AUD_SPKRAMP_RESET_L: 1.3V
                  • PPBUS: 12.6V
                  03-10-2025, 11:22 AM
                • Cemal Odabasioglu
                  MacBook Pro A1707 Motherboard Diagnostic Help – CD3215 heating and Fluctuating Rails
                  by Cemal Odabasioglu
                  Hello everyone,

                  I'm currently diagnosing a MacBook Pro A1707 motherboard that does not power on. I've gathered some data but am stuck and need expert advice.
                  Note that i'm a beginner in electronics and i'm trying to learn while trying to repair this macbook that my work gave me. I'm really curious and love understanding how thing works and i already learned so much.

                  Only one usb c port is taking 20v and have 12.5v on PPBUS_G3H. when trying other ports, 2 are not going to 20v and one is going to 20v but the CD3215 is getting really hot.

                  Observations...
                  01-14-2025, 03:54 PM
                • johnbeton
                  Macbook Pro A1706 820-00923 no power after replacing top cover and keyboard
                  by johnbeton
                  Hello,

                  I have a A1706 with 820-00923-A board. The laptop came in with non-working keyboard. I bought a new top-cover with keyboard and transfered everything to the new topcover.
                  Since then the macbook will not charge or power-up. Before replacing top cover, I started the macbook to test, and it worked fine apart from keyboard. Then shut it down and did replacement.
                  This is what I measure so far:


                  Resistance from F7000 to ground is 123 Ohm on pin 1 and 2

                  PPBUS_G3H = 0,79v
                  PPBUS_HS_CPU = 0,79v
                  PPBUS_HS_OTH5V = 0,79v
                  PPBUS_HS_OTH3V3...
                  05-21-2024, 02:06 PM
                • Loading...
                • No more items.
                Working...