Lenovo BYG40 NM A411 No power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • psdavid65
    Member
    • Dec 2021
    • 24
    • Ghana

    #1

    Lenovo BYG40 NM A411 No power

    Quick question please.
    Does anyone have an idea what voltage is supposed to be on VUSB, and PD7, VUSB_OPEN and drain of PQ12.
    The schematic for the motherboard is BYG40 NM A411
  • mon2
    Badcaps Legend
    • Dec 2019
    • 14024
    • Canada

    #2
    Re: Lenovo BYG40 NM A411 No power

    Vusb is based on the USB specification and should be about +5 volts. Often this power rail is enabled by a USB load switch which defines the max current draw of the mating downstream USB device. If the current draw is exceeded, the switch is expected to turn off and report this fault to the upstream USB host controller. This event then raises a pop up balloon flag in the windows task bar.

    If you are missing this vusb rail, look for a damaged USB load switch nearby.

    Comment

    • psdavid65
      Member
      • Dec 2021
      • 24
      • Ghana

      #3
      Re: Lenovo BYG40 NM A411 No power

      Thank you for the speedy reply. I'm grateful.

      Comment

      Related Topics

      Collapse

      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        11-22-2024, 01:46 PM
      • PantherDave
        Microsoft Surface Pro (5th gen) model 1796 - no power
        by PantherDave
        Hi all!

        I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

        I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
        https://www.badcaps.net/forum/troubl...-hardware-devi...
        05-29-2024, 02:01 PM
      • GLISIT
        Asus Probook P5440UF-XB74 power issue
        by GLISIT
        Hi all,

        TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


        I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

        A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
        01-16-2025, 02:29 PM
      • Mita99
        Lenovo Thinkpad P72 EP720 NM-B723 MB - Power disabled within 2 seconds after plugging the charger
        by Mita99
        Hi,

        Try to repair a Thinkpad P72 EP720 NM-B723 MB with I7-8850H processor and N18E-Q1-KB-A1 (P3200) GPU with 6GB memory. Unfortunately there is noinfo what happened to the laptop. I got it disassembled with parts missing, like keyboard, battery.

        Unfortunately I have no schematic available for me (requested in the sub porum) but got the boardview file.

        Symptom: after connecting to the charger the power led light up for one-two second and switch off. After a couple secons the power led light up for half a second and switch off. No battery, no IO board, no...
        04-27-2025, 07:20 PM
      • Dr.d
        Help please..Lenovo ideapad 5 14itl05 power and charging problem
        by Dr.d
        I have a lenovo ideapad 5 14itl05, board LA-K321P, That will only power up on Battery only, or with battery disconnected and power adapter only. If battery is connected and usb-c power plug connected. It only works on battery and will not charge. I can however force it to charge by connecting the battery from a disconnected state while the power USB c plug is powering the laptop.

        Additionally....to add to this strange situation. The usb-c power plug ONLY works to power the laptop on one side when inserted into the boards power usb c plug. If you rotate it 180 degrees, the board gets...
        04-05-2024, 11:48 AM
      • Loading...
      • No more items.
      Working...