Hi i need somebody to help me identify this chip the markings is AKLG 302. It's on Hp Pavilion 14-am 245 G5 6050A2823301-MB-A02 motherboard
Attached Files
-
Last edited by SMDFlea; 06-19-2023, 12:45 PM. Reason: Added "the markings is AKLG 302" to thread title, moved thread to laptop forum -
Re: Help me identify this chip the markings is AKLG 302
https://www.badcaps.net/forum/showpo...85&postcount=3 AKL is the marking code,G is the date code.
See the attached pdf in that thread titled: Marking List April 2022.pdf ,search the pdf for AKL
.Last edited by SMDFlea; 06-19-2023, 12:53 PM.
-
This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.
There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as... -
Hi
I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
The SPI chip is an Winbond 25Q256JWEQ model (1V8).
The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.
I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6... -
please help me identify this component from hp laptop mobo. chip marking is QrDBC. Thank you -
Hello,
I have a robot vacuum cleaner here.
An Eufy Robovac L70 Hybrid.
A chip has burst due to a short circuit.
The following is legible on the chip:
Mpsm44
m2612
883138
I'm not sure if there is another number after m2612, as that's exactly where the hole is.
Can anyone help me identify what this component is?
Unfortunately, I couldn't find anything.
I also don't have any plans or board views of the... -
Hello
can someone help me identyfi chip marked 5v=7m1fh its on main board for HP L70914-601, looks like drve 2 mosfets for cpu core one mosfet was shorted to ground after replacment i discovered gate on another was low ohms.
Comment