Razer RZ09-0410AE22 Dead After LCD Replacement

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mgrharry
    started a topic Razer RZ09-0410AE22 Dead After LCD Replacement

    Razer RZ09-0410AE22 Dead After LCD Replacement

    Working on a Razer RZ09-0410AE22. The owner tried to replace the LCD on his own but forgot to disconnect the battery (). System now does not power on and shows no signs of life. I've removed the board and done some quick measurements on the top of the board showing steady 19v power. Photos are attached.

    Some guidance on further troubleshooting would be appreciated.

    Thanks.
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • double_DD
      Transformer replacement for a dead coffee machine
      by double_DD
      Hi guys,

      I have a dead coffee machine, and it seems that the culprit (no 1, at least) is a dead trafo - primary coil seems to be blown open (type shown on the picture below).

      Now, I'm unable to find direct replacement anywhere on ebay or aliexpress, and all similar that I' was able to find are rated too low (<1A).

      If someone knows a shop to buy replacement (EU/CH), that would of course be my 1st option.
      My other ideas:
      - to buy 220/20Vac trafo with 30VA, and to "manually" create secondary 12V output just via resistor
      - to buy...
      06-23-2025, 05:43 AM
    • BalkanBoy
      Dead Razer Blade 14 2022, shorted CPU?
      by BalkanBoy
      Hi,

      today I got Razer Blade 14, Ryzen 9 6900HX and RTX 3070Ti.

      Laptop was completely dead. I found shorted CPU VRM mosfet, shorted 19V mosfet and blown battery fuse.

      I replaced it all, but still on CPU coil where mosfet was shorted I got very low resistance, near 0 ohms. On other CPU coils I got around 3 ohms.

      Laptop now raises voltage on whole board, but still nothing comes on the screen. CPU gets 0.7V on all coils except the shorted one. CPU gets only slightly hot, below 40 C.

      I removed coil and injected 0.7V, it draw around...
      09-27-2024, 12:44 PM
    • NanoTesting
      ThinkPad 11e Chromebook GLIMMER - Dead eMMC 16GB to 32GB replacement and flashing full firmware through programmer
      by NanoTesting
      I got a Chromebook with dead eMMC, so the logical thing to do would be to replace it.
      Its a SDIN8DE4-16G, anything i should know before replacing it with SDIN8DE4-32G?

      Is it possible to flash a full firmware using a CH341 to be able to boot into windows through USB? since that would be way cheaper, better and quicker.
      Or are there any other ways to run mrchromebox script without booting into ChromeOS?
      02-17-2024, 02:06 PM
    • vicentemj
      Razer rz09-02386 dead after battery change
      by vicentemj
      Hello,

      I already flashed main bios 16mb from official site without success, my laptops has every normal voltaje that i can measure and i think the 8mb bios is corrupted.

      C1_MB PVT V3.0 20180315 GTX 1070

      I look for a dump or if anyone can look for my backups (16mb and 8mb)

      thanks
      11-20-2023, 03:19 PM
    • double_DD
      How can I be sure that my EC chip is dead?
      by double_DD
      Hi all,

      As the title suggests, how can I be sure that my EC chip is really dead?

      I've recently gotten into this hobby of laptop repairs, and have successfully brought back to life a couple with some easy fixes, mostly shorted caps.

      Now I'm working on HP Probook 455 G8, that had some "devil" run around on 3V line, burning a bunch of stuff. Luckily I have a dead 455G7 (for spare parts) so I managed to fix it (swapped burned parts) to a point that it will charge (both on barrel jack and usb-c), but it doesn't want to turn on. There is a 3V3 on a keyboard...
      03-12-2025, 07:47 AM
    • Loading...
    • No more items.
    Working...