MacBook pro 15 820-00928-A

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • alfredodinolfo
    Senior Member
    • Jan 2013
    • 128
    • N/A
    #1

    MacBook pro 15 820-00928-A

    Hi,
    I'm working on mbp 15 820-00928-a, very clean mb, sometime restart with Exclamation point but, if i force shoot down, it restart normally.
    Any suggestion?

    tks
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Enzo150i
      MacBook A2442 exclamation mark after oxydation
      by Enzo150i
      Hi all,
      I have a MacBook Pro A2442 with board 820-02098-A very highly oxydated (water) by an accident.
      The customer just need to recover the data (no backups, heh), so we cleaned fully to make it power on.
      Fortunately the Mac is still alive but it shows an exclamation mark in a circle (!) (Apple T2 fw issue?) with the text "support.apple.com/mac/restore" and doesn't go further.

      We tried to interface with another Mac, but can't get in DFU. Very likely the keyboard is gone too because the water, so we're planning to buy a cheap compatible one just to....
      06-29-2025, 01:26 PM
    • envym
      MacBook Pro 2018 with Activation Lock
      by envym
      Hi everyone!

      I have a 2018 MacBook Pro (with Sequoia OS) that I've been using for years with no problem. I recently received an M2 MacBook Pro so I'm mostly using it and not the 2018 one, but since a friend of mine needs a computer, I thought I could restore my 2018 and give it brand-new-like to my friend.

      I tried using the built-in tool to restore the MacBook (Settings > General > Transfer or restore > Delete) but it got stuck when trying to remove the Find Device configuration (it asked me for the password for my old Apple ID -now I use the same account but...
      06-27-2025, 08:54 AM
    • obelix24
      MacBook Pro a2442 - 20v restart every second
      by obelix24
      I just got one MacBook Pro a2442 (M1 Pro) there was small liquid damage.

      Board starts normally at 5V and then jumps to 20V but after few seconds USB-C meter restarts (on every port) - sometime 1 or 2 times it's start and doesn't restart.

      There was hotspot on U5200 (but it looks like on PIN1 (CHGR_GATE_Q4) but I've check in diode mode and it was ok reading (but I've replaced it anyway but still the same ...

      There was corrosion around UR660, UR630, UR600 but I've checked all CAPS and it looks ok ...

      When I connect USB-C meter and check with...
      11-07-2024, 11:34 AM
    • kingskie
      macbook pro A1989 restart when sleep and A1707 restart when shutdown
      by kingskie
      Hello all,

      I got macbook pro A1989 that has sleep wake failure..always restart when put in sleep mode or close the lid..if i shut down and close the lid there would be no problem at all.. already reinstall the mac os but still has the same problem even restore with DFU mode.

      and for macbook pro A1707, this one always restart when i try to shut down..always restart when put in sleep mode.

      can anyone help me? @piernov, @mon2 ?
      thanks before
      09-18-2021, 08:11 PM
    • SarcasticOP
      General question about MacBook power rails for repair.
      by SarcasticOP
      I am looking at an A2337 and found this for the order of power rails and what they do. Can this be confirmed before I dive into hunting down power rails that do not exist or are not neccisary?
      • PPBUS_G3H (12.6V-12.8V)
        • This is the main power rail that supplies power to the entire system. Check this rail first, as it must be present for other power rails to work.
      • PP3V42_G3H (3.42V)
        • This power rail is derived from PPBUS_G3H and is used to power the SMC (System Management Controller) and other essential circuits. It should be present if PPBUS_G3H is working correctly.
      • PPVRTC_G3H (3.3V)
        • This
      ...
      12-12-2024, 05:50 PM
    • Loading...
    • No more items.
    Working...