Cheap ultrasonic cleaner doesn’t work anymore

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • petehall347
    Badcaps Legend
    • Jan 2015
    • 4450
    • United Kingdom
    #41
    Re: Cheap ultrasonic cleaner doesn't work anymore

    i find them things either you can solder to them or you cant . seems you can if some solder is left on .been there done that on my multimeters beepers

      Comment

      Previous 1 2 3 template Next

      Related Topics

      Collapse
      • silberdrache
        Burnt Hole under IC on MacBook Pro M1 Pro 14"
        by silberdrache
        Hello,
        I'm new to this Forum, so I hope it's the right place for this topic.
        Im a student from germany, and as a hobby I repair electronics. I started microsoldering maybe 1-2 years ago.
        I have a MacBook Pro 14" m1 Pro with 10 Cores and 16/1tb storage. The board Number is 820-02098-A.
        The MacBook has a light water damage. Coffee got spilled over it, but the Mac continued working only the battery didn't charge anymore and when the battery was empty the Mac turned off and doesn't show any sign of life now.
        I opened it up and there were only three drops of coffee...
        11-10-2025, 11:19 AM
      • Henke
        Electrolux EUO9GREEN Vacuum Cleaner doesn't start
        by Henke
        I have a vacuum cleaner that won't start. I have desoldered 2 capacitors with low value. But i don't know if they can cause that kind of problem. Someone here with any thoughts and inputs?

        I marked the capacitors on the pcb picture with red and blue dots. The big one marked with 334 K measures 216 nF and the other one marked 224 K measures 109 nF.
        4 Photos
        01-08-2024, 11:37 AM
      • itsthatidiotagain
        CDS‑200B ultrasonic cleaner - (other generic Chinese cleaners are somewhat similar)
        by itsthatidiotagain
        CDS‑200B ultrasonic cleaner - AKA James Ultra 7050 etc.

        There are many versions of cheap Chinese ultrasonic cleaners, and a fair few share this design, with a removable tank with handle. There are also fixed tank versions which look to use the same basic layout and presumably the same PCBs.

        I picked one up "spares or repair" on ebay, and the cleaner was dead, but the fuse wasn't blown.

        A quick diode check revealed D7 was shorted. D7 is a 12V 1/2 Watt Zener. I had one in my stash, so this was about as close to a "five minute repair" as...
        06-23-2025, 03:22 AM
      • Stevedb
        Google drive missing back-ups and doesn't make back-ups anymore after reset phone
        by Stevedb
        Hi all

        I have anoying problem after resetting my blackview bv9900 phone doesn't find google drive my phone back&ups anyymore also doesn't make new back-ups from my phone anamore. Does anyone know why it happens and how i can fix it . I will not like to lose my data again. Also back-up button is grey out see picture.

        Regards Steve...
        07-22-2022, 03:37 AM
      • tricky74
        Chinese no brand ultrasonic cleaner
        by tricky74
        I bought an ultrasonic cleaner from ebay and after a couple of years it blew one of the driver boards fuse and a couple of diodes. I replaced the parts and it worked for a while then died again. Since then I have thrown out the board and just use one. The unit had 2 drivers and the good one drives 1 transducer only. The fried board was driving 2 transducers. The unit works on 1 transducer but is weak in power. I am tempted to connect the 2 transducers that were driven by the dead board. And leave the single disconnected. Not sure if it there is a fault in them and will just kill the driver. As...
        07-01-2022, 06:20 PM
      • Loading...
      • No more items.
      Working...