xbox ultimate solid-mod

[stj]

Re: xbox ultimate solid-mod

the only gotcha's are getting the smd electrolytics off without damaging the pads or exploding the caps,
and clearing the holes after removing some of the caps.

[Nier]

Re: xbox ultimate solid-mod

https://www.aliexpress.com/item/32370177546.html
https://www.aliexpress.com/item/32372832101.html
https://www.aliexpress.com/item/32983008282.html
https://www.aliexpress.com/item/32951610902.html

What is the capacitance to select for the tantalum capacitor linked below? Its the third link from your post.

https://www.aliexpress.com/item/32983008282.html

[stj]

Re: xbox ultimate solid-mod

the same as the small electrolytics your replacing.

[Ryeno]

Re: xbox ultimate solid-mod

What size tant. caps did you use?

[stj]

Re: xbox ultimate solid-mod

check the links, because i cant remember

[Ryeno]

Re: xbox ultimate solid-mod

check the links, because i cant remember

What do you think of these substation?

Xbox 1.0
13x 25v 22uf Nippon SME (5x11mm) -> RNS1D220MDS1 CAP ALUM POLY 22UF 20% 20V T/H
6x 25v 100uf Nichicon VR (6x11mm) -> RNS1D101MDN1 CAP ALUM POLY 100UF 20% 20V T/H
3x 16v 1500uf Nichicon PW (12x20mm) -> RNU0J152MDN1 CAP ALUM POLY 1500UF 6.3V T/H
2x 10v 3300uf Nichicon PW (12.5x25mm) -> APSC6R3ELL222MJB5T CAP ALUM POLY 2200UF 6.3V T/H
1x 10v 680uf Nichicon PW (8x15mm) -> RR71A681MDN1 CAP ALUM POLY 680UF 20% 10V T/H
5x 6.3v 1500uf Nippon KZE (10x20mm) -> RR50E152MDN1 CAP ALUM POLY 1500UF 2.5V TH
1x 16v 47uf Nichicon WX (6.3x5.4mm) -> 16SVPG47M CAP ALUM POLY 47UF 20% 16V SMD
7x 16v 10uf Nichicon WX (3x5.4mm) -> ???