Looking for help with this sound generator toy

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tucocaps
    Badcaps Veteran
    • Apr 2013
    • 331
    • United Stated

    #1

    Looking for help with this sound generator toy

    Hello,

    This is a part to a kid's play kitchen setup that I picked up recently at a yard sale. I'd really like to get this working for my son. After putting in new button cell batteries, all I can seem to get out of the circuit is a faint clicking sound upon pressing the buttons/contacts.

    I'm not sure what kind of sound it's supposed to produce, but the circuit looks fairly simple, unless there is an IC I'm missing. I've checked voltage at about 4.8 coming out of the battery box, and going to the speaker/transducer. Thanks much for any ideas on this!

    Attached Files
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: Looking for help with this sound generator toy

    It is one of those embedded IC DIE right on the PCB. i think all you can do is to check the surrounding components but not much you can check on the IC (IC IDE is under that black blob of epoxy).
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • tucocaps
      Badcaps Veteran
      • Apr 2013
      • 331
      • United Stated

      #3
      Re: Looking for help with this sound generator toy

      Originally posted by budm
      It is one of those embedded IC DIE right on the PCB. i think all you can do is to check the surrounding components but not much you can check on the IC (IC IDE is under that black blob of epoxy).
      Thanks Bud. Do you think it's likely the IC has failed? Not sure on the surrounding components or how to test in circuit.

      Comment

      • kc8adu
        Super Moderator
        • Nov 2003
        • 8832
        • U.S.A!

        #4
        Re: Looking for help with this sound generator toy

        about all you can do is test that lone transistor.it drives the speaker.

        Comment

        Related Topics

        Collapse

        • ChaosLegionnaire
          what i went through dealing with my mobo with dead onboard sound!
          by ChaosLegionnaire
          so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

          i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
          09-13-2022, 09:02 AM
        • edugimeno
          Help me identify the missing component... Sound to light circuit
          by edugimeno
          hI there!
          Im trying to help a friend repairing a large, real-sized short-circuit robot.
          This is remotely controlled and has a 2 way voice send/receive. Also while the hidden operator is talking, the red bulb inside the "mouth" should flash according to the sound
          Some other technician used to service it and he was fired leaving all the repairs unfinished and no documentation at all.

          What I found is a sound receiver, a speaker, and a wire directly to the mought bulb (a normal motorbike 5W 12V bulb).
          So I bought a simple 2X30W amplifier to feed the loudspeaker...
          02-14-2024, 10:23 AM
        • LEECH666
          Grundig Vision 9 37 9880 T USB (Chassis SR) TV Repair Help - Distorted Subwoofer Sound and overall weird sound waveforms
          by LEECH666
          Good day ladies and gentleman!

          I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.

          This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).

          I think the PSU buzzing comes from one of the coils near the bridge rectifier but...
          01-19-2024, 05:46 PM
        • Christos Tsiligiannis
          Marian Trace Alpha sound card repair help
          by Christos Tsiligiannis
          Hello to the forum.

          My name is Christos, I am new to the forum here and i am posting from Greece.

          So i have this old German sound card from Marian, called Trace Alpha. To be exact i have 2 of them and i use them professionally for my small FM radio station here. The first one works like a charm, but the second one does not work at all.

          To be more specific in the same exact pc with windows 7 (i even tried 32bit) the one works while the other doesn't.

          So i tried asking for a schematic from the company and they would not give me one. Instead they...
          11-18-2024, 05:26 AM
        • Document Archive
          HP ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar ProDesk 600 i5-9500T Specification for Upgrade or Repair
          by Document Archive
          This specification for the HP ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar boardview and ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
          09-12-2024, 02:30 PM
        • Loading...
        • No more items.
        Working...