DJI Mini Pro 3 missing components near camera connector

[summerwhite]

I have a DJI drone that is not displaying a video feed anymore after a repair.

When tearing down the DJI drone to fix the armature there was some hot glue next to the camera connector that i had to remove.

Now there are missing components either because they got pulled off or because they where never placed.

I have two reference images from XXZ and a photo of mine.

I'm truely hoping someone has another DJI Mini Pro 3 that they can help me identify what these components are and if they are necessary.

On the board view from XXZ they are all present. However there are a lot of components present on the board view that are not present on my board in different areas.

I've tried soldering on a couple 1uf capacitors but its shooting in the dark.

Its been a nightmare to be honest.

[stj]

check this stuff out.
https://www.badcaps.net/forum/docume...files-from-xzz

in future you can melt hotglue with white spirit aka paintbrush cleaner
or you can make it un-stick itself with IPA

[summerwhite]

Thanks but I already the boards views from XZZ and the images I posted are from those schematics.