MSI 1660S Ventus missing components

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Caspar
    Member
    • Apr 2013
    • 25
    • USA
    #1

    MSI 1660S Ventus missing components

    Hi all, I accidently knocked off some components on a MSI 1660S Ventus while trying to remove the heatsink to repaste the GPU. The missing components are located on the top left corner of the GPU. Does anyone happen to know what the values of the components are? I circled the missing components in the provided picture. Any help would be greatly appreciated.

    Thank you!

    PS If there's a boardview, that would help as well!
    Attached Files
    Tags: None
    • Rezistor
      Badcaps Veteran
      • Jun 2021
      • 281
      • USSR
      #2
      Re: MSI 1660S Ventus missing components

      boardview MSI MS-V???

        Comment

        • Caspar
          Member
          • Apr 2013
          • 25
          • USA
          #3
          Re: MSI 1660S Ventus missing components

          Hello Rezistor. I don't see any visible MS marking on the PCB. The only board marking is on top of the PCI-e contact pins and it reads V375 VER 1.2. I am not sure if this is the correct information. I appreciate your help. Thank you!
          Attached Files

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Yolofolkss
              Huawei D14 dah98ambad0 rev d please help identify Missing components
              by Yolofolkss
              Huawei D14 dah98ambad0 rev d please help identify Missing components

              Hello I just bought this laptop to be used personally (that I'm currently trying to repair.), I am aware that liquid (gravy) has been spilled in this area before. but there are missing components it it possible to have a board view or a schematic of this? or just an idea on what components its missing?

              as far as I know this parts are connected as sense or enable.... that's how far I know...

              Images attached:
              the picture of the area. and some of the pinouts that I noticed on the chip...
              03-26-2023, 12:37 AM
            • Artakozu
              Xfx RX470 - Missing components
              by Artakozu
              Hi, I'm new to this forum.
              I recently bought a damaged XFX RX470 for around $10-12 USD. As you can probably see, I believe the only issue is some missing components, likely due to a scratch or a fall.
              Can anyone help me confirm which components are missing, and specifically, tell me the value of capacitor C502?...
              05-20-2025, 06:26 PM
            • summerwhite
              DJI Mini Pro 3 missing components near camera connector
              by summerwhite
              I have a DJI drone that is not displaying a video feed anymore after a repair.

              When tearing down the DJI drone to fix the armature there was some hot glue next to the camera connector that i had to remove.

              Now there are missing components either because they got pulled off or because they where never placed.

              I have two reference images from XXZ and a photo of mine.

              I'm truely hoping someone has another DJI Mini Pro 3 that they can help me identify what these components are and if they are necessary.

              On the board view from XXZ they...
              3 Photos
              04-06-2025, 11:15 PM
            • grimacelord
              HP 15-cs3055wm - DAG7BLMB8DQ REV:D - Missing Components - Fan Error
              by grimacelord
              Hello,

              I have an HP laptop here (model and board model in title) that powers on with an error message about the fan not working properly and needs to shutdown. The thing is, the fan is spinning just fine. I disregarded the message and continued to boot into Windows and loaded up OCCT to look at temperatures and the OCCT was reporting that the CPU was very hot (98C) and climbing, so I shutdown the computer, did a CMOS reset and checked then thermal paste and heatsink for dust build-up. Paste looked good, but I cleaned it off and applied fresh paste anyway and blew out the fan from...
              03-15-2024, 01:29 PM
            • Flash993
              Delta Electronics ADP-230JB D missing components - help please
              by Flash993
              Hey everyone,

              So I was trying to troubleshoot my Power Supply (look at the title for brand and model) for my laptop and mistakenly stabbed some components off. I have tried searching for a schematic/diagram but I could not find any at all. If someone has one please post it. I will add a picture of the components missing if someone with a bigger brain or the power supply PCB pictures wants to help me out. Thank you for your time reading my post for help.
              3 Photos
              10-14-2024, 09:00 PM
            • Loading...
            • No more items.
            Working...