PS4 NOR check error su-37553-3

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SoJustMe
    New Member
    • Jul 2024
    • 5
    • Saudi Arabia
    #1

    PS4 NOR check error su-37553-3

    Hey guys,

    Need help checking the ps4 nor dump
    Ps4 system does not update

    Error Su-37553-3

    I already tried everything but nothing work the only thing left is NOR flash might be corrupted

    Can anyone fix it if its currupted please!!
    • Also i dumped another console same model and board that it work but don't know if i flash it will be ok? Afraid to mess thing up not used to do software things
    Attached Files
    Tags: None
    • Ipvano
      New Member
      • Nov 2023
      • 2
      • Германия
      #2
      Originally posted by SoJustMe

      Need help checking the ps4 nor dump
      Hi, try this dump and use new SPI Flash.
      Attached Files

        Comment

        • SoJustMe
          New Member
          • Jul 2024
          • 5
          • Saudi Arabia
          #3
          Originally posted by Ipvano

          Hi, try this dump and use new SPI Flash.
          Many thanks, i flash it and it worked like a charm.

          Finally the system update with no error.. i tried evertything but nothing worked only left me in puzzle and lead me only think that NOR is corrupted and was my conclusion right..

          How did you repair it ? The other guy was giving me links for paid tools i doupts...anyway if you can tell me for my curiosity i will be thankful.. and i have a dump from a working one , what if i flash it will it work or not? Because i did not have the courage to do so lol i was afraid to brick it

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Superbee_dad
              Sharp 80” long short flash backlight error - Help
              by Superbee_dad
              Hello Sharp TV experts
              Our Sharp LC-80LE642U displays one short one long flash error code which is a backlight error. I went into service mode and there were 8 lamp error counts recorded. I reset the count to 0 and did a reset. The last monitor error cause was 16 B00014639:12. 16 is the code for backlight error. I tried to power the tv up but went back into error mode.

              > I checked voltages on the power supply board and they all check out .. including 3.28 volts at the error pin.
              > There is power to the cpu and T-CONN and no faults found there. The cpu has a flashing...
              01-24-2025, 11:51 PM
            • Sus256
              HISENSE 65E7KQ PRO - no boot
              by Sus256
              Hi all!

              HISENSE 65E7KQ PRO
              RSAG7.820.13512 - chassis
              MT9618BAATAB - cpu
              RSAG7.820.12059 - power
              HD650Y3U77 - panel
              KLM8G1GETF - emmc

              The TV does not turn on, the standby indicator is on. All voltages are present.
              Emms is dead. Not readable, not detected.
              Replaced emmc.
              But with another dump there is no launch

              Terminal log

              UART
              <
              AC_ON
              RPMB key is not yet programmed

              HASH1_VERSION=0x00000000 64bit
              E-B
              FDE enabled
              layout pattern onebin by SAR7,0...
              06-01-2025, 02:11 AM
            • kyrios
              Flash LG PK5 DEMO - CH431A ERROR - verification error on address 00000000
              by kyrios
              Hello!

              I apoligize for my English. I need some help.

              I have an LG PK5 in demo version and trying to repair it, I found the original firmware in this forum to flash speaker to the original version.
              Without having any idea about these things, I give thanks this forum and other tutorials, I bought a CH431A programmer and I have tried to do all the steps but after reading the new firmware, in the "verification" step I get this error: verification error on address 00000000
              Could someone help me to solve it, please?

              Thank you so much
              11-30-2023, 01:06 PM
            • ekozeko333
              [Help] Lenovo Yoga Slim 7-14ARE05 (DA0LS3MBAF0) – 25Q80DVN1G Flash Is All FF, USB-C PD Stuck at 5V
              by ekozeko333
              Hi all,
              I’m trying to recover a Lenovo Yoga Slim 7-14ARE05 with board DA0LS3MBAF0 Rev:F. I’ve run into an unusual issue where USB-C PD is stuck at 4.7–5V and the system won’t boot (keyboard lights flash briefly, then nothing).
              🔥 The Problem Started After Suspected ESD/PD Fault
              I experienced a power issue or ESD event through a USB-C charger
              After that, the NX20P5090 power switch was visibly burned and was replaced
              Now the PD controller always negotiates 5V @ 2A, even with known-good chargers
              🧠 What I’ve Done So Far
              Flashed...
              06-21-2025, 02:48 AM
            • andre4744
              Dell G15 5515 - Error 43 After Incorrect VBIOS Flash on RTX 3050
              by andre4744
              The dell g15 5515 service tag 64TXVM3 turned on and no image appeared. I reprogrammed the wrong BIOS chip, I ended up doing it on the 25Q16JWSIQ VBIOS chip. After realizing the error, I reprogrammed the correct chip and burned the ROM of the GPU taken from TECHUP (https://www.techpowerup.com/vgabios/...le-4096-210618) on 25Q16JWSIQ. When starting, the notebook turned on normally and showed an image, but the GPU shows error 43 in Windows. I uninstalled the drivers via DDU and installed them again, without success. I used NVFlash, the GPU is recognized, but the EEPROM is not...
              2 Photos
              02-10-2025, 08:44 AM
            • Loading...
            • No more items.
            Working...