Z87 EXTREME 3 BIOS DUMP rev. 1.05

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hdg
    New Member
    • Oct 2007
    • 9

    #1

    Z87 EXTREME 3 BIOS DUMP rev. 1.05

    Please... anyone have the full bios dump? Thanks.
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 21853
    • UK

    #2
    Re: Z87 EXTREME 3 BIOS DUMP rev. 1.05

    ASRock ?
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    • Hdg
      New Member
      • Oct 2007
      • 9

      #3
      Re: Z87 EXTREME 3 BIOS DUMP rev. 1.05

      Originally posted by SMDFlea
      ASRock ?
      yes asrock

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 4785
        • Russia

        #4
        Re: Z87 EXTREME 3 BIOS DUMP rev. 1.05

        Originally posted by Hdg
        Please... anyone have the full bios dump? Thanks.
        https://www.badcaps.net/forum/showthread.php?t=87050

        Comment

        Related Topics

        Collapse

        • gabrieljma1
          Request: Full BIOS dump for ASRock Z790-CX (DDR5)
          by gabrieljma1
          Hello everyone,

          I’m looking for a full raw 16 MB BIOS dump for an ASRock Z790-CX (DDR5) motherboard.

          The board powers on (fans spin, RGB lights on, RAM LEDs active), but there is no display output and the VGA and BOOT LEDs stay lit.
          I’m using an Intel i9-14900KF CPU (14th gen), and it seems the BIOS version on my board doesn’t support it yet. I tried to flash the official ASRock BIOS file (renamed .ROM → .BIN) directly using my RT809H programmer, but it didn’t work — monitor stays on but with black screen, so I believe the ASRock update file is not a complete...
          10-08-2025, 03:32 PM
        • Ahari
          Request HP Proliant Microserver Gen 8 (J06) BIOS dump to restore system firmware
          by Ahari
          Hi all,

          This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.

          I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.

          I...
          08-13-2025, 06:12 AM
        • subzerillo
          Asrock H510M-HDV/M.2 SE bios dmi area from dump
          by subzerillo
          Hello.

          I'm wondering how can I check and extract de dmi area from a bios backup.
          I know it depends on the brand and model of the motherboard. Is there some guide that could help me understand and extract the dmi from the original bios dump to a new bios file.

          The motherboard is H510M-HDV/M.2 SE

          Attached is:
          h510m is the dump bios
          h510mhms1 is the downloaded bios from the website...
          10-09-2025, 02:23 PM
        • khanhtq0
          Full BIOS Dump for ASRock H310M-HDV Rev 1.02 (MX25L12873F)
          by khanhtq0
          Hello everyone,

          I'm looking for a full BIOS dump (.bin) for the ASRock H310M-HDV Rev 1.02 motherboard. The BIOS chip is a MX25L12873F (128Mb / 16MB).

          I’ve already tried flashing the official BIOS from ASRock (version 1.40 and 3.30), but those are Instant Flash versions and don’t include the full SPI image (e.g. Intel ME Region, Descriptor, etc.). After flashing, the board powers on only when I short PS-ON to ground, and it fails to generate Vcore and 2.5V. Other rails like 1.05V and RAM voltage are present.

          I suspect the original Intel ME and descriptor...
          08-06-2025, 02:14 AM
        • mkdj
          ASUS ZenBook UX480F : need help with cleaning the ME region of my BIOS dump
          by mkdj
          Dear all,
          I have a ASUS ZenBook UX480F with the following symptoms:



          I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.

          I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...
          10-19-2025, 04:41 AM
        • Loading...
        • No more items.
        Working...