i have MSI H81M-E33 MS-7817 that not work after water spill.
i need to check what is wrong.
i need to check what is wrong.
-
-
Re: have somebody start diagram for motherboards? MS-7817 water spill
Here is the boardview or schematic, maybe that will helpLast edited by dicky96; 06-09-2021, 11:21 AM.Follow me on YouTube
------------------
Learn Electronics Repair
https://www.youtube.com/channel/UCFX...R8UZ2vg/videos -
Re: have somebody start diagram for motherboards? MS-7817 water spill
Sorry forgot to attach the file lolFollow me on YouTube
------------------
Learn Electronics Repair
https://www.youtube.com/channel/UCFX...R8UZ2vg/videosComment
-
Re: have somebody start diagram for motherboards? MS-7817 water spill
thanks i allready have it. im more familiar with laptops.
i dont know starting sequence of pc motherboards.
board is poorly marked so BV will be aprisiatedLast edited by ktmmotocross; 06-09-2021, 02:09 PM.Comment
-
Re: have somebody start diagram for motherboards? MS-7817 water spill
Taxxan posted the Power On Sequence for H81 chipset here. His is a gigabyte board but same chipset would suggest the sequence is the same as your board
https://www.badcaps.net/forum/showthread.php?t=96386Follow me on YouTube
------------------
Learn Electronics Repair
https://www.youtube.com/channel/UCFX...R8UZ2vg/videosComment
-
I got lucky that when I got home and was about to get some ice out of the ice dispenser I hear and see water running down the outside of the ice dispenser what the heck is going on here
At first I thought that the ice dispenser mold was cracked so I brought a new ice maker because this one has been in there for about 10 years now
Well I put the new one in and wait and I wait for the water valve to open and let water in no such luck well there is a way to check the function of the motor and the water valve on this ice maker just need a jumper wire “L” to... -
Hello,
Does anyone have a wiring diagram for the pump mentioned?
The markings on the board are 98800964 r07, two or three capacitors are burnt.
I don't have the board with me yet, but I don't know if the printed lines on the board are visible due to the short circuit that occurred and how the capacitors were connected. -
Hi! My friend just brought this audio amplifier/speaker fro his music band saying they realized its got no sound. Led powers up but there no sound at all
I opened it and found 3 board. 2 of them are for input plugs and potentiometers, and the other larger board has the amplifiers for 2 large speakers that it drives
There's also a large toroid transformer that feeds a lower voltage to the first 2 boards and a larger voltaje (36x2 rectified close to 100v) to the power board. The power board has the plugs for both speakers
There is only one signal wire connecting the first boards... -
hello everyone, I'm looking for the wiring diagram of this led monitor.
the model is DHI-LM19-L200, but I think that any other diagram of a DAHUA monitor could be equivalent.
I really hope that among you someone can help me to repair this monitor, the screen is black, it doesn't seem like a backlight problem.
I see the presence of 12 volts, 5 volts, but without a diagram the repair is very difficult.
thanks to those who will answer12-10-2024, 04:37 PM -
I have a water damaged Toshiba TV that was hanging nicely on the wall then over the summer we had a new multi-million pound boiler system put in and right where this TV was hanging is a nice new pair of water pipes for the radiators...
The TV hasnt been used for a fair few months but it was needed again the other day and needless to say, it didn't power on or show any signs of life (no standby LED etc). After checking the fuse in the plug (and that the socket it was plugged in to worked) I decided to get up some step ladders to take a closer look and low and behold! It looks like...
Comment