Hi All,
Currently struggling with this bios and EC Problem and hope someone with more knowledge might be able to help, so my laptop PC Specialist Ionico 17 ( Tongfang GM7TGxP / 11800h rtx 3070 ) had lower than normal resistance on the PCH, so before i changed the pch i attempted to flash a bios/ec from same type of laptop board ( i am not the original owner and PC Specialist would not help ) which did flash ok but no change, after that i changed the chip and all resistance readings from all rails were normal, so i turned the laptop on with the new PCH and it turned on as soon as i plugged the power in (did find that strange but ok ) then laptop would attempt to boot but but after 1 minute turn off, so i checked the power rail and give myself a small scare when the cpu had 1.8 on core... turned the laptop straight off, the PCH Was new and all seem fine but then i though that i had the bios from the one i found online ( attached under 111bbb ) when i re-flashed the original bios then the same as before, i got 19.5v / 5v / 3.3 / 1.8v and all ok up to 1.05 and the laptop seems to not be starting the PM States, if anyone has a answer or solution please let me know, i have attached all files.
Thanks,
Matt
Currently struggling with this bios and EC Problem and hope someone with more knowledge might be able to help, so my laptop PC Specialist Ionico 17 ( Tongfang GM7TGxP / 11800h rtx 3070 ) had lower than normal resistance on the PCH, so before i changed the pch i attempted to flash a bios/ec from same type of laptop board ( i am not the original owner and PC Specialist would not help ) which did flash ok but no change, after that i changed the chip and all resistance readings from all rails were normal, so i turned the laptop on with the new PCH and it turned on as soon as i plugged the power in (did find that strange but ok ) then laptop would attempt to boot but but after 1 minute turn off, so i checked the power rail and give myself a small scare when the cpu had 1.8 on core... turned the laptop straight off, the PCH Was new and all seem fine but then i though that i had the bios from the one i found online ( attached under 111bbb ) when i re-flashed the original bios then the same as before, i got 19.5v / 5v / 3.3 / 1.8v and all ok up to 1.05 and the laptop seems to not be starting the PM States, if anyone has a answer or solution please let me know, i have attached all files.
Thanks,
Matt
Comment