T48 (TL866II plus) Chip identification with OTP option?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Buzzfuzz2k
    Member
    • Nov 2023
    • 29
    • france
    #1

    T48 (TL866II plus) Chip identification with OTP option?

    Hello Guys

    I have a T48 programmer and i'm trying to read/write a W25Q256JVEQ chip.

    The Programmer identify and propose me 2 chips:
    - W25Q256JV@WSON8
    - W25Q256JV(OTP)@WSON8

    I have read the datachip of the chip and i don't really understand well the utility of the OTP ...

    I have made some tests:
    Test1: select "W25Q256JV@WSON8", read ok, modify the dump and reprogram.... Programming failed.... if i dump again, file is different from the first dump
    Test2: Select " W25Q256JV(OTP)@WSON8", read ok, modifiy the dump and program back.... Programming works.... if i dump again, dump is same as injected.

    The OTP file is larger, it's like if at the end of the 'nonOTC file (that finish at 01FFFFF0) you add lignes from 02000000 to 020002F0 with "FF"

    Can someone explain me what is OTP for and when to use it ?

    Many thanks

    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Document Archive
      Acer TravelMate P2510-G2-M-54Q3 + Option Pack Notebook P2 Specification for Upgrade or Repair
      by Document Archive
      This specification for the Acer TravelMate P2510-G2-M-54Q3 + Option Pack Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the P2510-G2-M-54Q3 + Option Pack boardview and P2510-G2-M-54Q3 + Option Pack schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
      09-06-2024, 08:00 AM
    • Habble7
      I need a BIOS dump for the Samsung S49CG934SU monitor
      by Habble7
      The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

      Suspected Cause:
      I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

      Troubleshooting Attempts:
      ...
      05-22-2025, 07:28 AM
    • Mephysis
      DUMP DVR HIKVISION DS-7208HGHI-K1 (80389 Rev 1.3 Firmware)
      by Mephysis
      Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.

      I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
      03-27-2025, 02:34 AM
    • hyperwood
      [REQUEST] 2MB BIOS Dump for Lenovo NM-E471 Rev 2.0 (Winbond 25Q16JWSIQ Chip)
      by hyperwood
      Hi everyone,

      Iā€™m looking for a 2 MB BIOS dump for a Lenovo IdeaPad 5 16ARH7H / Legion 5 with mainboard NM-E471 Rev. 2.0.

      The BIOS chip is a Winbond W25Q16FW (1.8V, 2MB) and it's completely unresponsive / bricked. I tried recovery via USB but no success. Now I want to reflash it externally using a CH341A programmer.

      I already found 32MB dumps (e.g. from Vinafix and Badcaps), but they are too large for the chip ā€“ and the last 2MB in those files are just FF FF FF....

      āœ… What I need:
      • A working 2MB BIOS dump
      • Matching NM-E471 Rev. 2.0, e.g. JY575
      ...
      06-25-2025, 02:28 PM
    • Andreas_de
      Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
      by Andreas_de
      Hello!

      i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
      Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

      Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
      ...
      2 Photos
      04-12-2025, 10:38 AM
    • Loading...
    • No more items.
    Working...