NCR_MILANO_V3.1 bios password

[clemence]

hello good people. i need help can someone clean this bios file it has a password i can't boot or enter bios setup. its a small mini tower NCR i have searched everywhere online but i cant find a clean bin file for this tower. i have attached the backup bios file

[SMDFlea]

Re: NCR_MILANO_V3.1 bios password

hello good people. i need help can someone clean this bios file it has a password i can't boot or enter bios setup. its a small mini tower NCR i have searched everywhere online but i cant find a clean bin file for this tower. i have attached the backup bios file

Post the full PC model number and serial number.

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103569

.

[clemence]

Re: NCR_MILANO_V3.1 bios password

NCR_MILANO_V3.1
MODEL: 445-0775206 REV. A 25/19 MISANO
SN: SZ405877520600A196H0Y4

this is all i can see on the motherboard. on the cover(housing) there is nothing.

[clemence]

Re: NCR_MILANO_V3.1 bios password

is there anyone who can help me pliz?

[volinakis]

Re: NCR_MILANO_V3.1 bios password

is there anyone who can help me pliz?

try this but I'm not sure. I deleted what I think is supervisor password, see photo. I filled selected area with 00, you can try filling with FF if it doesn't work.

[clemence]

Re: NCR_MILANO_V3.1 bios password

thank you let me try it now will post results

[clemence]

Re: NCR_MILANO_V3.1 bios password

i have flashed the bios and it comes on but says

Error: Admin Password & BBS Password should not be empty.

then it gives me the option to setup new admin password but after i do that it then gives me error: CRC32 Check Fail and then goes back to Admin password setup screen. i have attached the pics of the errors. any help will be greatly appreaciated.

[hoaca388]

Re: NCR_MILANO_V3.1 bios password

i have flashed the bios and it comes on but says

Error: Admin Password & BBS Password should not be empty.

then it gives me the option to setup new admin password but after i do that it then gives me error: CRC32 Check Fail and then goes back to Admin password setup screen. i have attached the pics of the errors. any help will be greatly appreaciated.

Change 00 by FF

[clemence]

Re: NCR_MILANO_V3.1 bios password

sorry for the trouble guys, i have a challenge the hex editor i am using when i search inside the file for offset 13516464 gives error that there is no such offset found in this file i don't know what i am doing wrong. what HEX editor did you use VOLINAKIS?

[volinakis]

Re: NCR_MILANO_V3.1 bios password

search for hex:

53007500 70006500 72007600 69007300 6F007200 500077
(SupervisorPw)

also check SystemUserPw below, it seems there is something there

[Maxpower3]

Re: NCR_MILANO_V3.1 bios password

search for hex:

53007500 70006500 72007600 69007300 6F007200 500077
(SupervisorPw)

also check SystemUserPw below, it seems there is something there

The password is too salty
the Getac solution (see last image) AAS VS CMP (3F Vs 3C) cannot work on this model?

[volinakis]

Re: NCR_MILANO_V3.1 bios password

The password is too salty
the Getac solution (see last image) AAS VS CMP (3F Vs 3C) cannot work on this model?

too advanced for me! But he can try.

[SMDFlea]

Re: NCR_MILANO_V3.1 bios password

NCR_MILANO_V3.1
MODEL: 445-0775206 REV. A 25/19 MISANO
SN: SZ405877520600A196H0Y4

this is all i can see on the motherboard. on the cover(housing) there is nothing.

The motherboard is from an ATM machine ,just so you know.

.

[mbusoluju]

TRY OUT IT WORKED FOR ME

[vladimirplus]

Thanks to everyone for the help!
I managed to do it, but I had to replace the password with zeros in three places, as FF didn't work. The next part is more interesting: the BIOS complains about the CRC32. The secret is that NCR came up with the following solution: when entering a new password for the first time, you enter the password itself, and instead of confirming the password, you enter its CRC32
(https://crc32.online/), and everything will work.