hello good people. i need help can someone clean this bios file it has a password i can't boot or enter bios setup. its a small mini tower NCR i have searched everywhere online but i cant find a clean bin file for this tower. i have attached the backup bios file
-
-
Re: NCR_MILANO_V3.1 bios password
Post the full PC model number and serial number.
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103569
. -
Re: NCR_MILANO_V3.1 bios password
NCR_MILANO_V3.1
MODEL: 445-0775206 REV. A 25/19 MISANO
SN: SZ405877520600A196H0Y4
this is all i can see on the motherboard. on the cover(housing) there is nothing.Comment
-
Re: NCR_MILANO_V3.1 bios password
is there anyone who can help me pliz?Comment
-
Last edited by volinakis; 10-26-2023, 03:02 AM.----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: NCR_MILANO_V3.1 bios password
thank you let me try it now will post resultsComment
-
Re: NCR_MILANO_V3.1 bios password
i have flashed the bios and it comes on but says
Error: Admin Password & BBS Password should not be empty.
then it gives me the option to setup new admin password but after i do that it then gives me error: CRC32 Check Fail and then goes back to Admin password setup screen. i have attached the pics of the errors. any help will be greatly appreaciated.Attached FilesComment
-
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: NCR_MILANO_V3.1 bios password
sorry for the trouble guys, i have a challenge the hex editor i am using when i search inside the file for offset 13516464 gives error that there is no such offset found in this file i don't know what i am doing wrong. what HEX editor did you use VOLINAKIS?Comment
-
Re: NCR_MILANO_V3.1 bios password
search for hex:
53007500 70006500 72007600 69007300 6F007200 500077
(SupervisorPw)
also check SystemUserPw below, it seems there is something thereAttached FilesLast edited by volinakis; 10-26-2023, 11:33 AM.----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
-
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Comment
-
TRY OUT IT WORKED FOR MEAttached FilesComment
-
-
Thanks to everyone for the help!
I managed to do it, but I had to replace the password with zeros in three places, as FF didn't work. The next part is more interesting: the BIOS complains about the CRC32. The secret is that NCR came up with the following solution: when entering a new password for the first time, you enter the password itself, and instead of confirming the password, you enter its CRC32
(https://crc32.online/), and everything will work.Comment
But he can try.
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set.... -
Hello
I removed the BIOS password thanks to the help of one of the friends of this forum.
https://www.badcaps.net/forum/troubl...61#post3637661
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but... -
Hello everybody!
To put you in context I recently replaced the battery from my HP Pavilion 15 bc400ns with a used one, everything was going good. The same day, I decided to update the BIOS, everything went good. The thing occurred after I let the battery drain iddling on Windows 11 for the second time to calibrate it that the screen did not turn on again, the computer was on but the screen did not turn, like it would not wake from hibernation. I decided to restart the computer but got no video.
The thing is that I had installed TeamViewer and could log into the computer... -
Hello,
I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.
However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)...
Comment