I want to make the board be compatible with 8/9 gen and want to see where socketok is on the boardview.
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
As the title states i am looking for a schematic and boardview for the ASUS MAXIMUS VIII IMPACT motherboard.
I know that the boardview exists (ASUS MAXIMUS VIII IMPACT REV1.01.fz) but cannot find it free of charge, the schematic however might not be leaked.
For anyone interested, the repair guide is attached to this post.
Thanks.... -
Hi,
I have this very stubborn ASUS mobo on the bench, and I already face the wall with it. It just refuses to POST, although everything seems to be OK.
The situation looks like this:
After connecting the board to the power supply on Nuvoton (SLP_S3#, pin 64), the Low signal (50 ohm resistance) appears immediately. PWRNTN# signal goes through Nuvoton to the chipset (confirmed after removing the chipset). The following conditions are then met for the chipset to generate the SLP_S3# signal:
1. RTC oscillates normally (32.768KHz).
... -
Hello
Search Boardview Asus MAXIMUS VIII HERO ALPHA rev: 1.0
ref 596518 -00328 - MB0P50 - A03 0205
1st look and test:
Lots of missing components under PCH + Socket damaged and tracks ...
Lights up, starts but no reaction
initialization remains at code Q 00
following :
after inspection and replacement resitor and repair track
I replace the 0 ohm resistor under PCH and add another 0 ohm. (look pics)
NOW, motherboard start
but missing I still think 2 caps under PCH....
Comment