help repairing Gigabyte gv-n105toc-4gd

[nvidiauser]

Re: help repairing Gigabyte gv-n105toc-4gd

hi
otherhands does the card works ?
if it does u can try to reflash the card...
did u try msi afterburner and try to use your own def for fans ?

Thanks for your reply!

Yes, otherhand of graphic card works fine.
So I tried reflash bios, try afterburner or Gigabyte software, but don´t work.
I try to test fan pin (there are 4) and the pin 3v (pin 2) show 0,12v...

[klendatu]

Re: help repairing Gigabyte gv-n105toc-4gd

so if i understand your fans spins but never stops and the rest of the card works normally ?
the 3.3 seems commanded by D504 U509

[klendatu]

Re: help repairing Gigabyte gv-n105toc-4gd

question
what are the size of c825 c674 ? 201 or 402 ?
if those sizes where to find a cheap price seller in aliexpress ?
only find those sizes on expensives books
ty

[nvidiauser]

Re: help repairing Gigabyte gv-n105toc-4gd

so if i understand your fans spins but never stops and the rest of the card works normally ?
the 3.3 seems commanded by D504 U509

Hi.
No, fans aren´t spin... fans only spins just a second when I power on the computer...
U509 is empty on this pcb... D504 shows 0.12v in pin2 and 3, pin1 shows 0v

Some things on this pcb are diferent... I think that I nedeed boardview of GV-N105TG1-4GD but I can´t find in nothing place

Thanks for you support!

[klendatu]

Re: help repairing Gigabyte gv-n105toc-4gd

fans starts to spin and stop at boot thats normal
after they must go on about 60 61 degres...
test it with occt but dont pass 75 degres....
the limits of gpus are abt 80 degres

[klendatu]

Re: help repairing Gigabyte gv-n105toc-4gd

btw
does someone got dead pcb to send me ?
just to recover missing capa that i need....
ty fa

[klendatu]

Re: help repairing Gigabyte gv-n105toc-4gd

Ah sorry, I misunderstood.

If you are pulling components from another board then it would be helpful to have a schematic for that board as well, otherwise its hard to know.

well only find 1 220nf in the right size
most that i found are up size.... think i ll be able to mount them....
otherwise is it possible to put 100nf in place ? got plenty
of course it allways to mount 2 on //
the only pb is mechanical should mount half pin each.... maybe more risk of arrachment

[klendatu]

Re: help repairing Gigabyte gv-n105toc-4gd

re
i look the 2 ways.... easier to put 1 in higher size...

[klendatu]

Re: help repairing Gigabyte gv-n105toc-4gd

******repaired*****
that was the missing caps in pcie data rail

[Sarehman]

Re: help repairing Gigabyte gv-n105toc-4gd

Could anyone share impedence values of all coil of this card GV-N105TOC-4GD
most important is GPU impedence???????? thanks.

[ilod]

Re: help repairing Gigabyte gv-n105toc-4gd

This boardview should work

Sorry for super late reply but how do i open this? donwloaded teboview and it asks for a password

[Xaspy]

Hi! May be its late, but I found boardview for that videocard.