Missing capacitor - Radeon HD 7850 2Go- Which values to choose?

[fab13]

Hello to all

I have a Sapphire HD 7850 2 go
I would like to have a little information about a capacitor to add and its value.
This graphics card turns on with fan running but no display in HMDI ouch.

After checking on the boardwiew exact and precise and I have only the boardview.

Indeed, it misses 3 capacitors of size 0402 of which 2 on the line +1.8 Volts is C1700 in 1 uF and 1 in C1704 on the line +1.8 V in 0.1uF
Finally, the C2208 at 0.1uF on the +MVDD line


My question is : However I do not have a 0.1uF capacitor so by what value can I add?By 100nF it is possible?
I only have these and I don't have a doneuse card.
Do you think it will not disturb the line?

Last question =D what does the rail +MVDD mean?

Thanks a lot in advance :grouper:

[fab13]

Re: Missing capacitor - Radeon HD 7850 2Go- Which values to choose?

I added 2 capacitors in 100 nF which replaces the 0.1uf and one of 1uF and the problem remains the same with a black screen no signal in HDMI. I checked the + 5V line in diode mode and everything drops around 0.500 Volts. And I tested the resistors at the outputs of the HDMI all the values are correct compared to the diagram. Ideas the team?