Apple A1418 All-In-One Computer, faulty screen?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dicky96
    Sun Seeker
    • Mar 2017
    • 1825
    • Spain

    #1

    Apple A1418 All-In-One Computer, faulty screen?

    Hi guys, first let me say I am no expert on Apple computers - in fact I never looked at one before

    I also hope this is the correct forum section, as this is not a laptop or portable device

    I thought this one must have a faulty screen panel, but the customer thinks that can not be the case.

    He says it was working then suddenly crashed and would not restart.

    He rebooted the computer using a USB stick (recovery software? I have no idea with Apples)

    The USB did whatever it should and the PC then booted back up but it is missing a part of the image on the right of screen

    Can someone please advise me what could cause this, and if the screen did fail why would it cause the PC to crash and corrupt the OS at the same time?

    See pics

    Cheers
    Rich
    Attached Files
    Last edited by dicky96; 09-10-2021, 12:12 PM. Reason: speeling
    Follow me on YouTube
    ------------------
    Learn Electronics Repair
    https://www.youtube.com/channel/UCFX...R8UZ2vg/videos
  • piernov
    Super Moderator
    • Jan 2016
    • 4439
    • France

    #2
    Re: Apple A1418 All-In-One Computer, faulty screen?

    Did someone try to open it?
    OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

    Comment

    • dicky96
      Sun Seeker
      • Mar 2017
      • 1825
      • Spain

      #3
      Re: Apple A1418 All-In-One Computer, faulty screen?

      I don't think so piernov - I tend to believe this customer that it failed exactly like he said

      I haven't tried opening it in fact I'm not sure how it opens, though I didn't actually look to see
      Follow me on YouTube
      ------------------
      Learn Electronics Repair
      https://www.youtube.com/channel/UCFX...R8UZ2vg/videos

      Comment

      Related Topics

      Collapse

      • abajor
        A2141 Screen replacement. Boots screen freezes on Apple Logo 1/3 status bar unless connected to second monitor.
        by abajor
        Having this very weird issue.
        The owner of this laptop complained about screen being intermittent when opening and closing, and has been using the laptop on a thunderbolt video connection since the screen failed.

        I swapped with a working screen from an A2141 waiting for parts.

        The Os exhibits this weird behavior where it boots to to 1/3 the status bar, then it makes the boop sound. It's at the log in but for whatever reason the desktop isn't loaded.

        The laptop boots fine into recovery mode. I updated from Monterey to Sonoma and the laptop still has...
        04-27-2024, 01:37 PM
      • sigmeyer
        Toshiba 50UL4B63DG faulty screen?
        by sigmeyer
        I got this 50 inch tv the screen starts off with almost nothing visible but the top part of it , and it would slowly kick in and the picture would be visible , but then over time it would go greyish with the top of it mostly intact. I did have instance where the screen would be fucked like that and i would touch the cpu and memory to see if it would react and a couple times it would screech on the speakers and restart. After that it would show a better picture somewhat but afterwards i touch the cpu and not much is achieved. Im wondering is this a screen fault or should i pursue this with a donor...
        08-30-2025, 08:13 AM
      • Ryan.man
        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
        by Ryan.man
        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
        02-04-2025, 12:23 PM
      • smic717394
        iphone XS turns off when press on screen.
        by smic717394
        Hi,

        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
        07-25-2024, 10:16 AM
      • a_p3rson
        Apple Watch Charging Controller Schematics / Boardview - 820-02601
        by a_p3rson
        Hi there,

        I'm looking for anyone who might have information on Apple's embedded Apple Watch charging daughterboard, ID 820-02601. This is currently used by Anker in their Apple Watch charging products, but likely by other Apple partner brands as well.

        You can see the board referenced in ChargerLab's teardown of the Anker Y1811 3-in-1 MagSafe cube - they discuss the "Apple Watch wireless charging circuit" about 2/3rds down the page. It's not pictured, but the board ID reads 820-02601-A, which sure sounds like Apple.
        This daughterboard uses an interesting...
        04-21-2025, 11:41 PM
      • Loading...
      • No more items.
      Working...