M2n68-AM SE

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • chano76
    Member
    • Jun 2019
    • 11
    • Argentina
    #1

    M2n68-AM SE

    Hi pals!
    i`m having a problem with this m2n68
    i've tried to figure out my self to not bother you all with these, but i'm on an end road.
    The motherboard had a lot of 6.3V 820MF caps, all blown, i've recaped all of them, but the problem continues
    It only turns on for 2 second and go off. If i unplug the 4 pin CPU connector it`s stay on.
    I've no power on the core, only have 12 volts in the Drain of the VRM on the green square, and no voltage at all on the red squares.
    No VRM 's are shorted, nor hot.
    Any advice will be apreciated
    Regards!!!!!
    Attached Files
    Last edited by chano76; 08-17-2019, 06:41 PM.
    Tags: None
    • cpt.charlie
      Badcaps Veteran
      • Sep 2013
      • 270
      • Spain
      #2
      Re: M2n68-AM SE

      Maybe a bad CPU VRM controller (if the EC doesn't receive CPU_PWR_GD signal it will likelly turn off the motherboard)

        Comment

        • chano76
          Member
          • Jun 2019
          • 11
          • Argentina
          #3
          Re: M2n68-AM SE

          Thanks for your help cpt.charlie!
          it's possible that none of the P0903BDG VMR has voltage in the gate nor the source? only 12 V in Drain?

            Comment

            • R_J
              Badcaps Legend
              • Jun 2012
              • 9535
              • Canada
              #4
              Re: M2n68-AM SE

              Have you tried it with a cpu installed? It may require a cpu (VID) before it knows what to set the output voltage to.
              Last edited by R_J; 08-18-2019, 09:43 PM.

                Comment

                • cpt.charlie
                  Badcaps Veteran
                  • Sep 2013
                  • 270
                  • Spain
                  #5
                  Re: M2n68-AM SE

                  Originally posted by chano76
                  Thanks for your help cpt.charlie!
                  it's possible that none of the P0903BDG VMR has voltage in the gate nor the source? only 12 V in Drain?
                  The VRM mosfets are driven with short pulses at the gate pin, but as R_J said, you need to install a valid cpu as the VRM controller needs to know the startup VID.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • tofik
                      MOSFET equivalent K8A60DA
                      by tofik
                      Hello guys,

                      I have a shorted MOSFET K8A60DA with the following characteristics:
                      Type Designator: TK8A60DA
                      Marking Code: K8A60DA
                      Type of Transistor: MOSFET
                      Type of Control Channel: N -Channel
                      Maximum Power Dissipation (Pd): 45 W
                      Maximum Drain-Source Voltage |Vds|: 600 V
                      Maximum Gate-Source Voltage |Vgs|: 30 V
                      Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
                      Maximum Drain Current |Id|: 7.5 A
                      Maximum Junction Temperature (Tj): 150 °C
                      Total Gate Charge (Qg): 20 nC
                      Rise Time (tr): 25 nS
                      Drain-Source                      ...
                      07-19-2023, 05:18 AM
                    • jkucukov
                      Asus ZenBook 13 UX333F External Short - Fast Battery Drain - Need Help
                      by jkucukov
                      I'm trying to see if someone could help me with my Asus Zenbook 13 UX 333F with given symptoms that I've experience during a recent external short.

                      During last laptop charge, as I was moving the DC power supply, I caused the two leads (+ -) to touch. After that event the laptop stopped charging and pulling amps form the power supply. The only way the laptop will come on is with the power supply connected and the battery having some charge to it, battery drains immediately after short operation (it gets to Windows log in screen before it shuts off). The laptop would power on, show...
                      02-05-2025, 09:27 PM
                    • Document Archive
                      Asus M2N68-AM SE2 Motherboard Boardview
                      by Document Archive
                      Asus M2N68-AM SE2 Motherboard Boardview...
                      10-22-2024, 12:43 PM
                    • tantr13
                      Lenovo Ideapad 5 14ITL05 not powering on
                      by tantr13
                      Hi everyone,
                      This is my first post so I'm hoping to get some help on this awesome forum. As a preface, I'm an amateur at electronics, especially troubleshooting complicated devices like laptops. However, I'm trying to develop a skill for it so I can learn how these devices work and how to repair them without continuing the wasteful tradition of throwing them away and buying new. 🤮

                      I've had a Lenovo Ideapad 5 14ITL05 for a few years now, with motherboard LA-K321P. I would never leave it plugged in unless I was using it, and always turned it off after I was done, but last week...
                      06-28-2024, 06:28 PM
                    • rddube
                      Toshiba 58L1350UC short on Q301 Drain to source
                      by rddube
                      Hello everyone,

                      Need some help in diagnosing all the ripple effects of a failing Mosfet Q301, which originally was a K13A25D which was shorted Drain to Source.

                      I replaced it with a P16NS25 which had about the same specs, and the TV powered on for a few seconds, but dropped dead again and Q301 was again short on Drain to Source.

                      So started looking at some other components (after removing the shorted Q301) and found diode D301A shorted (took it out of circuit because both D301A and D301B were shorted in circuit, but it turns out D301B is good.
                      ...
                      03-05-2022, 06:05 AM
                    • Loading...
                    • No more items.
                    Working...