Soltek SL65KV2-T: Recapping Q

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BluBlur
    Member
    • May 2005
    • 45

    #1

    Soltek SL65KV2-T: Recapping Q

    I have the above board, bought cheaply from another person. The board does not boot. On closer inspection, all the 1500uf6.3v GSC caps are bloating/burst.

    One of the processor HSF retention leg also broke.

    Should I recap the board?
    Attached Files
  • willawake
    Super Modulator
    • Nov 2003
    • 8457
    • Greece

    #2
    Re: Soltek SL65KV2-T: Recapping Q

    if the HSF leg is broken then how you gonna attach a HSF? i suppose you could try to glue one to a proc with arctic silver thermal adhesive but i am not sure if that stuff is strong enough.
    capacitor lab yachtmati techmati

    Comment

    • BluBlur
      Member
      • May 2005
      • 45

      #3
      Re: Soltek SL65KV2-T: Recapping Q

      Originally posted by willawake
      if the HSF leg is broken then how you gonna attach a HSF? i suppose you could try to glue one to a proc with arctic silver thermal adhesive but i am not sure if that stuff is strong enough.
      Only 1 of the leg is broken. I can attach those HSF with 3 mounting holes on each side, i.e. Coolermaster Xdream or Taisol 1.5GHz. But if the probability of the board working after repair is low, I don't think I'll consider any mods.

      Comment

      • kc8adu
        Super Moderator
        • Nov 2003
        • 8832
        • U.S.A!

        #4
        Re: Soltek SL65KV2-T: Recapping Q

        use a hsf that attaches to the larger lugs.

        Comment

        • BluBlur
          Member
          • May 2005
          • 45

          #5
          Re: Soltek SL65KV2-T: Recapping Q

          Just did a recap on this board over the weekend. Happy to say, it came back to life, going through prime95 now. There are 2 GSC 470uf16v that I didn't remove as I didn't carry replacements in my mini store though.

          Photo coming in soon.

          Comment

          Related Topics

          Collapse

          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            11-22-2024, 01:46 PM
          • m1ch43lzm
            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
            by m1ch43lzm
            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
            05-12-2025, 08:37 PM
          • Hakuu
            LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
            by Hakuu
            Hi There,

            This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

            After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

            More Details

            TV Model - LG OLED77G1PUA

            Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
            07-12-2023, 02:37 PM
          • jb_Bak
            Sony xbr-65x900c main board issues?
            by jb_Bak
            Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

            Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
            Power Board Connector that goes to Main board
            CN6401
            Pin 01 NC
            Pin 02 NC
            Pin 03 "BL_ON": 0V
            Pin 04 "N/C"
            Pin 05 "STBY 3.3V": 3.5V
            Pin 06 "GND": N/C
            Pin 07 "AC_OFF"...
            09-27-2021, 04:52 PM
          • canadaboy25
            Panasonic TC-P54VT25 No image. A or D board?
            by canadaboy25
            I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

            The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

            I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
            01-17-2021, 01:06 AM
          • Loading...
          • No more items.
          Working...