Asus Tuf B560M-Plus Usb over current detected (Please Help)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • roxboy1984
    Senior Member
    • Jan 2022
    • 177
    • South Africa

    #1

    Asus Tuf B560M-Plus Usb over current detected (Please Help)

    Hi Everyone,

    I wonder if someone could please help me diagnose this issue. The pc powers on and a message saying overcurrent detected is displayed and then shuts off after 15 seconds. I see the front IO USB 3 ports one of them is damaged. i Have disconnected the header on the motherboard as well as all other USB devices and headers and run the board outside the case and am still getting the message. I cant see any visible sign of fried IC.s and have looked with a thermal cam and cant see anything getting ridiculously hot. Is there any way i can disable the USB 3 header on the motherboard to see if that resolves the issue. or anything else i can try? thanks

    Asus Tuf B560M-Plus motherboard
  • Fernon@Repair
    Member
    • Jan 2021
    • 29
    • Sri Lanka

    #2
    Check your all PTTC Fuses and USB_OC signal resistors values

    Comment

    • roxboy1984
      Senior Member
      • Jan 2022
      • 177
      • South Africa

      #3
      Thanks so much, do you possibly have a boardview/schematic for this board?

      Originally posted by Fernon@Repair
      Check your all PTTC Fuses and USB_OC signal resistors values

      Comment

      Related Topics

      Collapse

      Working...