Just re-capped my VP6 and all is good. :)

[MorTus]

To get a complete set of caps for my VP6 would have cost me AU$40+ p/h . But i came up with a better idea.

I had an old Abit KG7-RAID that was always a bit unstable so i replaced it. So i used the caps from there. Nice and FREE!

I just replaced 8x 1500uF 6.3V caps. Targetting the ones that looked buffy. (I would have done more, but the KG7-RAID only had 9 and i broke one). And now it's all working.

So basically I took 2 dead motherboards and now have 1 fully working one.

[Topcat]

Glad that it worked for ya... I'd just use that as temporary measures while you hunt down some good caps to replace all. If you harvested caps from a flaky Abit to fix another flaky abit, I don't hold out much faith in long-term stability.

What brand were the caps you harvested from the other abit?