HP 400 G2 Power no motherboard but no response from power button.

Andreasbest

Badcaps Legend

Join Date: Aug 2014

Posts: 1175

Country: Hellas ( Greece )
#1

HP 400 G2 Power no motherboard but no response from power button.

01-03-2024, 03:11 AM

Hello.
I received a HP 400 G2 that receives power on motherboard (the green LED is steady on) but nothing happens when i press the power button, neither if i remove any component (cpu, ram, speaker).
I have reflashed BIOS with working dumps, tried to reset CMOS and i also eplaced the DC Jack (was a bit loosy) but no luck.
There are no schematics for DINO motherboard so i guess i'm going against the odds.
Any help?

Thanks in advance!
Tags: None
Franklin32

New Member

Join Date: Jul 2023

Posts: 3

Country: Nigeria
#2

02-09-2024, 05:48 AM

Drop Board number.
Comment
Andreasbest

Badcaps Legend

Join Date: Aug 2014

Posts: 1175

Country: Hellas ( Greece )
#3

02-10-2024, 12:25 AM

Hello!
It's 810663-001
Comment

Previous template Next

HP Envy 13-BA1565na with intermittent power button

by themosttogain

Hope someone can give me some suggestions on this because i'm at my wits end with it...

I have an Envy 13-BA1565na here with an Intel Core i7 i7-1165G7 CPU (board is a LA-J475P Rev 1.0) which has an intermittent power button issue. The power button is integrated into the keyboard, and I have ruled out the keyboard, BIOS and battery as being the issue.

Basically, on mains power, the power button works fairly well. The first time you come to it after leving it sitting (either on charge or not on charge), it might take 2 or 3 presses of the button, but then the laptop boots...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
07-12-2024, 03:03 AM
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?

by Tynan Dill

I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

Upon bringing it home and plugging it up, it showed a standby light.

I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

The screen seems to blackout and stay black, but with a flashlight I can see the display.

With my Playstation 4 connected via HDMI, and running a game I can hear sound.

Assuming...

7 Photos
- Channel: Troubleshooting TVs and Video Sources
11-22-2024, 01:46 PM
Macbook Air - 2018 - A1932 - 820-01521-02 - Bootlooping if Power Button Connected

by reessi

Hello,

With the power button connected it either boot loops with the apple logo or no display but the charging meter shows it looping on charging every few seconds.

No corrosion any where!

Tried a replacement power button off ebay and the same.

Very occasionally it will work with the power button connected!

Same results with or without the battery.

Can it be a fault with the Audio board or the mainboard?

The touch Id assembly connects through the Audio board first then to the Mainboard.

Flex...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
06-26-2024, 03:31 PM
Hello anyone have AMD Motherboard AM4 Socket Motherboard Power Sequence

by Fernon@Repair

Hello anyone have AMD Motherboard AM4 Socket Motherboard Power Sequence like this .... I have intel motherboard power Sequence...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
08-10-2025, 12:54 AM
Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply

by sam_sam_sam

I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
- Channel: General Electronics Technical Discussion
03-31-2024, 02:12 PM
Loading...
No more items.

HP 400 G2 Power no motherboard but no response from power button.

HP 400 G2 Power no motherboard but no response from power button.

Comment

Comment

Related Topics