MSI K7D Master L (RED)
I am having problems with the cpu voltage being too low, It all started when the overheat alarm went off and I shut it down, now the cpu voltage is low and when I go to the bios and try adjust it there it gets worse. I have tried a new power supply and new cpus so any ideas? Thanks
-
-
Re: MSI K7D Master L (RED)
If photos can be made, we all would welcome that - try to focus on the CPU surroundings, called VRMs, they have bigger caps and some coils (possibly in a package), and around the AGP port & DIMMs... Your issue may be anything, but you need to be more specific - what does it mean when you go to the BIOS it gets worse - I have hard times imagining WHAT may go wrong, there are many thingies. Please enlighten us with more detailed information.Mobo: MSI K8N Master2-FAR CPU: 2x Opteron 265 OC'd @ 2,25GHz RAM: 2x2GB Crucial DDR400 CL3 ECC/Buff. (ECC OFF), VGA: ASUS HD6950 2GB Reference edition FLASHED TO HD6970 HDD: 80GB ATA133 Seagate ,OnBoard: 2xGLAN, 8-Ch. Realtek audio, USB2.0/Firewire, PCIe Physx card PSU: 850W Corsair AX Case: Cooler Master HAF932 + NZXT 5 Fan Controller.
-
This house has a Honeywell Accenta G3 alarm system. If the main unit loses power for any reason, the external siren sounds - even if the alarm is not even armed! Entering the code to disarm it is not an option as the keypads are completely dead when the power is out.
I presume this means the backup battery inside the box has failed, but I can't get in there and replace it without also setting off a tamper alarm! Is there any way to disable the tamper alarm so that electrical work can be carried out with the power off? Or a way to replace the backup battery without setting off the... -
Apologies if this is in the wrong section but being a car alarm siren that makes noise i thought it be best to put it in the audio section.
Had weird alarm issues where siren made a strange noise: https://www.youtube.com/watch?v=ZjsqndhionU
took siren out of the car and checked it out and pics attached seem to be the source of the issue.
shockingly the alarm still makes its normal sound if i trigger it manually so speaker seems to be intact.
getting a replacement is gonna be next to impossible, its a Toad Ai606 which is no longer in production and cant see to find a replacement... -
i bought a use console from ebay fixed it and it has parental lock. seller wasn´t helpful and nintendo either cause they don´t support used devices as they told me per mail. thanks for the bad support here in germany. was totally upset as i read the answer to my mail from 1 week ago.... there was no other way to get rid of that code rather than modding the console cause i didn´t even had the device id as it´s a patched V1 and for getting masterkey on salthax there is the need to type in the device id which was unknown in this case... i did a mistake. after the repair i entered my wlan and... -
I have got an old Gardtec GT595 alarm which has got a faulty keypad with a failed LCD screen. This was apparently a very common problem with these and many people have had to replace the whole alarm because of this problem. Somebody claims to be able to repair the keypads by replacing the screen and I have tried it myself by replacing the LCD with a commonly available HD44780 1602 16x2 Serial LCD screen but it is not working. I am sure it is a problem with a driver or simular which is not allowing the screen to talk to the rest of the electronics. Does anyone know what this original screen was... -
I had recently purchased a used Dell Inspiron 5559 that I had found at a local pawn shop. And of course the system is locked. And I have no idea what the Admin pw is and I have no information for the previous owner.
After many days of research I have found that this system, like many new system, require a Master PW/Code to unlock it or reprogramming of the BIOS.
Contacting Dell Support was a waste of time. They won't give me the the Master PW/Code unless I have the information of the Registered owner that they have on file. They even gave me a link to a page on their...07-12-2021, 04:20 PM
Comment