Replacement Caps for a Dell Motherboard

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • npolite
    Member
    • Jul 2012
    • 16
    • USA
    #1

    Replacement Caps for a Dell Motherboard

    Hi All,

    I'm trying to find replacements for a Rubycon 6.3V 2200UF. It appears to be a MCZ series. Do I need to find one with the exact same series or will any cap with a 6.3V 2200UF work?

    Thanks,
    Nick
    Tags: None
    • selldoor
      Slow Learner
      • Dec 2010
      • 7870
      #2
      Re: Replacement Caps for a Dell Motherboard

      Read this
      https://www.badcaps.net/forum/showth...&highlight=mcz

      You will see the owner of badcaps.net may have a kit for your board?
      Please upload pictures using attachment function when ask for help on the repair
      http://www.badcaps.net/forum/showthread.php?t=39740

        Comment

        Previous template Next

        Related Topics

        Collapse
        • dhenion
          Asus VivoBook F510UA-AH51 won't run on battery after motherboard replacement
          by dhenion
          I'm working on my sister's laptop: Asus VivoBook F510UA-AH51 - The motherboard died so I replaced it.

          The original board was:
          ASUS X510UNR REV 3.0 A

          The replacement board is:
          ASUS X510UNR REV 3.0 B (identical except B vs A - I couldn't find an A board anywhere. Visually they are identical.)

          It boots right up on the replaced motherboard and everything works fine on the new motherboard - but it won't run off battery. When I disconnect the charger it immediately dies. When I plug it back in and reboot the system - it still shows the battery at...
          1 Photo
          01-30-2024, 01:45 PM
        • Geeker007
          9th Gen Dell Optiplex Micro PC motherboard repair: Short Circuit?
          by Geeker007
          Hi All, I have a 9th Gen Dell Optiplex micro PC motherboard which doesn't power on. When I connect the motherboard with power adapter, it goes into safe mode and turns off. So from info I have gathered online, it looks like there is a short circuit on the motherboard. So can you guys help me with figuring out the issue?

          I am new to electronics repair, so my queries could be naive but I am ready to learn.

          So I have a multimeter and a solder with me. But I can try to get a variable voltage power supply with a thermal camera as well. From what I seen online, best way is...
          01-28-2025, 03:31 PM
        • TMTGTR
          Need Advice On Which Caps To Buy For Dell Dimension 8300 Motherboard
          by TMTGTR
          The Symptom:

          I own a Dell Dimension 8300 motherboard that will post and get to the black (XP pro 32bit) “We're Sorry Windows did not load” Screen.

          When restarting any option i.e. “Normal” “Safe Mode” etc. Computer re-boots to same screen. I checked RAM with memtest –OK Checked O/S Drive with Victoria -OK

          Upon Inspection:

          I did a physical examination and see that the 6 caps by the CPU are all bulging in various degrees. (See Pics Below).

          I found a YouTube vid with a guy who replaced these 6 caps and the computer works fine....
          05-24-2022, 06:26 PM
        • Julian Bailey
          Dell Latitude 5350 Ultra 7 Motherboard
          by Julian Bailey
          Hi

          I have a Dell Latitude 5350 Ultra 7 Motherboard I am trying to repair that has a blown chip.

          The chip is marked as eHOLH similar to the one I have pictured.

          Any ideas what it does and what the pin outs are as 3 tracks have gone and need to find out what / where they went / did etc.

          Dell PN of the motherboard is 08DCGW.




          Below is the area I am trying to repair:



          Does anyone have a picture of this motherboard in this area they could take and upload?

          Cheers...
          07-03-2025, 11:25 PM
        • rewease
          Replacement for the Siemens Bakelite caps in an early 1980s SMPS
          by rewease
          Hi everyone,

          There actually was a time when early SMPS and late bakelite housed electrolytic caps coexisted in high end industrial gear. A friend of mine just got himself a CNC milling machine form that time with its first set of now 41 year old caps still installed in the PSU... and it's malfunctioning.

          Two of the caps have already leaked slightly onto the board. I have not desoldered or measured any so far but they should qualify for replacement.

          Now I'm wondering what to put in there as a replacement. First idea was state of the art low-ESR Nippon KY,...
          09-17-2023, 12:53 AM
        • Loading...
        • No more items.
        Working...