Announcement

Collapse
No announcement yet.

Asus P3v4X Mosfet Connection : Source to ground

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Asus P3v4X Mosfet Connection : Source to ground

    I am trying to repair a asus P3V4X, now i pretty much finish everything except the mosfet.

    I 'm not sure whether the mosfet's source is connected ground or not(picture burn0.jpg point A and B)

    Let me know the resistance value if you have the same board

    the mosfet is near the cpu slot and the HIP 6013CB


    Tags: None
    #2
    Re: Asus P3v4X Mosfet Connection : Source to ground

    Most probably not - the source (B) connects to the cathode (tab) of the flywheel diode (D10?) and one side of inductor L14. The drain (tab) of the MOSFET is probably connected to the +5v or +12v rail.

    Comment

      #3
      Re: Asus P3v4X Mosfet Connection : Source to ground

      Is the pic of your board? Because that chip (voltage controller chip?) has a burn mark...
      "The one who says it cannot be done should never interrupt the one who is doing it."

      Comment

        #4
        Re: Asus P3v4X Mosfet Connection : Source to ground

        the picture is taken before the repair. I have just replaced the hip6013cb chip . I just want to make sure the mosfet 's connection.

        Comment

        Previous template Next
        Working...