Bad cap near CPU 1000/10v. Replaced with one from old P166 board (urgent). First time for me recapping 
Now I'm going to do the whole board (properly)
Matt
Now I'm going to do the whole board (properly)Matt
-
-
Re: Sy7vba133-u
Hmm, is this a Soyo board?
What is the cap from that pentium board?
days are so short when you actually do something.. -
Re: Sy7vba133-u
i had one of those, nuked it with a bios flashComment
-
Re: Sy7vba133-u
Did you ever try to save it or was the bios ic SMT?Ya'll think us folk from the country's real funny-like, dontcha?
The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.Comment
-
Re: Sy7vba133-u
bios wasnt smt. i seem to have lost it now. it was about the time i was really into bx boards so it probably got replaced with one of those, i wasnt so knowledgeable then. they did sell quite a few of those vba133 i remember so many people having them one year in greece. we used to have only soyo then lots of msi....then we discovered badcaps.
i never forget getting a 300 p2 with a diamond viper and playing a version of tomb raider in win98 on a 17" sony trinitron....damn my first badass pc (with scsi also....fuck them quantum bigfoot) heh
Last edited by willawake; 04-20-2006, 01:01 PM.Comment
-
Re: Sy7vba133-u
The bad cap was a Wendell 1000/6.3 105c (not 10v...oops). I replaced it with a YEC 1000/6.3 85c from the P166 board. I ordered the replacement caps from Digi-Key(Panasonic - ECG FC).Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... -
Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.
Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
Power Board Connector that goes to Main board
CN6401
Pin 01 NC
Pin 02 NC
Pin 03 "BL_ON": 0V
Pin 04 "N/C"
Pin 05 "STBY 3.3V": 3.5V
Pin 06 "GND": N/C
Pin 07 "AC_OFF"... -
I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.
The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.
I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
Comment