Abit KA7-100

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • dood
    Deputy dood
    • Mar 2004
    • 2462
    • USA
    #21
    Re: Abit KA7-100

    Looks much better... thanks for the advice, topcat! Still waiting on the MOSFET to finish the board, though...

    Ludicrous gibs!

      Comment

      • PeteS in CA
        Badcaps Legend
        • Aug 2005
        • 3579
        • USA, Unsure of Planet
        #22
        Re: Abit KA7-100

        With an ohm meter, every lead should be "open" or very very high resistance with respect to every other lead. The same should be true with a diode checker except if you connect the "+" lead to the Source and the "-" lead to the drain: that should read like a diode. This assumes an N-channel MOSFET; with a P-channel, the polarity of the diode checker leads would be reversed.
        PeteS in CA

        Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
        ****************************
        To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
        ****************************

          Comment

          • dood
            Deputy dood
            • Mar 2004
            • 2462
            • USA
            #23
            Re: Abit KA7-100

            It lives!





            Works great, even with the busted up MOSFET situation... the jumper wire appears to be holding up . It's installing WinXP now, ready to start stress testing!
            Ludicrous gibs!

              Comment

              • Topcat
                The Boss Stooge
                • Oct 2003
                • 16956
                • United States
                #24
                Re: Abit KA7-100

                Nice!

                Well done!
                <--- Badcaps.net Founder

                Badcaps.net Services:

                Motherboard Repair Services
                ----------------------------------------------
                Badcaps.net Forum Members Folding Team
                http://folding.stanford.edu/
                Team : 49813
                Join in!!
                Team Stats

                  Comment

                  Previous 1 2 template Next

                  Related Topics

                  Collapse
                  • Tynan Dill
                    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                    by Tynan Dill
                    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                    Upon bringing it home and plugging it up, it showed a standby light.

                    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                    The screen seems to blackout and stay black, but with a flashlight I can see the display.

                    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                    Assuming...
                    ORIGINAL POWER SUPPLY BOARD
                    7 Photos
                    11-22-2024, 01:46 PM
                  • m1ch43lzm
                    HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                    by m1ch43lzm
                    Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                    Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                    05-12-2025, 08:37 PM
                  • Hakuu
                    LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                    by Hakuu
                    Hi There,

                    This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                    After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                    More Details

                    TV Model - LG OLED77G1PUA

                    Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                    07-12-2023, 02:37 PM
                  • jb_Bak
                    Sony xbr-65x900c main board issues?
                    by jb_Bak
                    Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                    Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                    Power Board Connector that goes to Main board
                    CN6401
                    Pin 01 NC
                    Pin 02 NC
                    Pin 03 "BL_ON": 0V
                    Pin 04 "N/C"
                    Pin 05 "STBY 3.3V": 3.5V
                    Pin 06 "GND": N/C
                    Pin 07 "AC_OFF"...
                    09-27-2021, 04:52 PM
                  • canadaboy25
                    Panasonic TC-P54VT25 No image. A or D board?
                    by canadaboy25
                    I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

                    The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

                    I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
                    01-17-2021, 01:06 AM
                  • Loading...
                  • No more items.
                  Working...