KT6V-LSR opinion

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Cartel
    Senior Member
    • Feb 2006
    • 112
    #1

    KT6V-LSR opinion

    Sorry my webcam kinda sucks, I'm wondering if these caps are getting puffy or if its the stamped X indented on the top ?
    Also my board is missing 2 regulators, that normal ?
    Thanks


    Tags: None
    • Rainbow
      Badcaps Legend
      • Aug 2005
      • 1371
      #2
      Re: KT6V-LSR opinion

      The caps don't look bad.

        Comment

        • yanz
          Badcaps Veteran
          • Nov 2004
          • 910
          #3
          Re: KT6V-LSR opinion

          feel with your fingers, it should feel flat

          Also my board is missing 2 regulators, that normal ?
          that's normal.

          The caps don't look bad.
          idk, the caps look bulged in my screen..
          Last edited by yanz; 02-15-2006, 05:42 AM.
          days are so short when you actually do something..

            Comment

            • Cartel
              Senior Member
              • Feb 2006
              • 112
              #4
              Re: KT6V-LSR opinion

              Thanks for looking, heres 2 pictures of a new power supply, I wondered why it was not working, I didnt know the caps could be suspect



              Here's 2 more pictures of my motherboard

              This picture above is the one that makes me worry, notice the flat caps and the not-so-flat one.......


                Comment

                • Cartel
                  Senior Member
                  • Feb 2006
                  • 112
                  #5
                  Re: KT6V-LSR opinion

                  by the way the caps are teapo and Ost by the cpu, thanks

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • vulubalulu
                      Dell U2718Q, horizontal lines. second opinion welcome
                      by vulubalulu
                      I have never seen an issue such as this one. horizontal lines across the monitor in a consistent manner. I am really interested to get to the bottom of this and I'd value any input from the community.
                      There are three separate PCB parts attached to each other. They function as SMPS, backlight driver and main board.
                      I checked the all three blue PCBs: SMPS outputs 19V, PWM controller + mosfets without anomalies, main board has 3V, 5V, 10.5V and 19V present. Crystals output the right clockspeed. This is to be expected as the monitor turns on.
                      I haven't explored at the green PCB (TCON...
                      7 Photos
                      08-14-2024, 03:08 PM
                    • unnu
                      please tell me your opinion on this situation
                      by unnu
                      i was a proud owner of a new lenovo y560 laptop
                      for me it was a very new experience to use a laptop . i had used only desktop PC many times. i enjoyed playing games on my laptop very much. This pleasure lasted only till the day there was a electric power cut followed by a power surge at my home and while i was playing a game (crysis 2) . when the power cut happened the laptop Operating System went automatically to power saving mode...so the heatsink cooling fan stopped spinning and then ( a few seconds later ) as soon as the electric supply resumed and power surge happened the laptop shifted...
                      12-29-2020, 08:44 AM
                    • peku
                      HP Omen 17-w104no dead PCH? Second opinion
                      by peku
                      Hi,

                      First some laptop info:
                      Model: HP Omen 17-w104no
                      Motherboard: Quanta G38D
                      CPU: Core i7 I7-6700HQ (I think?)
                      GPU: nVidia GTX 1070

                      What happened: plugged in an old smartwatch for charging/syncing after years of no use, after a while computer just shut down, leaving a little white light at the power button. Pressing power after that, nothing happens. After opening up case and disconnecting/connecting battery, not even that white light appears, no light on the charging connector either.

                      I've tried diagnosing with a multi-meter...
                      01-25-2022, 07:47 AM
                    • Ancient1
                      Toshiba 65S2650EV 65" TV What in your opinion the issue is ?
                      by Ancient1
                      Flickers at lower half (only? short vid. )

                      Buyer drove 100km with it, after it goot a bump at the staircase.

                      Toshiba 65S2650EV 65" TV
                      It was repaired "here" highly unusual and over 6 months long saga. ( I can give the link if you're interested )

                      I used only VGA to check the display. He uses HDMI. ( told him to try VGA etc)

                      Video : https://mega.nz/file/gdsUxAwR#HP2nHw...dUJfYXs2roKwgA
                      12-14-2022, 10:03 AM
                    • jdbird613
                      Audio Wire Connector Question/Opinion!?...
                      by jdbird613
                      So I've got this old "Program One" stereo receiver & equalizer, and the RCA jacks are pretty crummy from sitting idle for 20+ years, so I've ordered new jacks to replace the old ones...upon inspection, I see that the backside of the jacks are actually wrapped (pics) with the their specific wires...no sort of connectors present. I am taking a short cut and attaching 22-20 guage pull to seat terminals to the wires, and then connecting to backside of the RCA jacks as the pics show. They are are very snug fit, and I also plan to add solder for reinforcement. Can anyone offer me their...
                      10-16-2019, 09:47 PM
                    • Loading...
                    • No more items.
                    Working...