GTX 680 problems, Wrecks main board

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rene77
    New Member
    • Dec 2022
    • 3
    • NL

    #1

    GTX 680 problems, Wrecks main board

    i tested this Asus gtx 680 which came with a bunch of computer stuff.

    When i only connected the 8 pin, the PC still started and gave the error on the display that also the 6 pin needed power.
    when all connectors where powered and both leds were green, the PC did not boot, Fans where running, but nothing else.
    Even when removing the GTX this failure kept on the main board.
    No boot, no beeps, only the fans running, nothing else.

    main board was a Asus B85m-G, PSU 650 Watt.

    Tried a second (old) main board with a dual core, same results.

    What can be wrong with the GTX, and what can be wrecked on the main board?
    CPU and Memory are ok.
  • jiroy
    Badcaps Legend
    • Jun 2016
    • 2416
    • Lebanon

    #2
    Re: GTX 680 problems, Wrecks main board

    Originally posted by Rene77
    i tested this Asus gtx 680 which came with a bunch of computer stuff.

    When i only connected the 8 pin, the PC still started and gave the error on the display that also the 6 pin needed power.
    when all connectors where powered and both leds were green, the PC did not boot, Fans where running, but nothing else.
    Even when removing the GTX this failure kept on the main board.
    No boot, no beeps, only the fans running, nothing else.

    main board was a Asus B85m-G, PSU 650 Watt.

    Tried a second (old) main board with a dual core, same results.

    What can be wrong with the GTX, and what can be wrecked on the main board?
    CPU and Memory are ok.
    Plenty of troubles here ... I will only mention the Asus B85m-G for now . Sometimes on constant repeated errors , the Bios would shut down to protect the board and eventually get stuck doing it . Try to reset the bios , re-seat the bios battery ,re-seat Memory modules .. Things to force the bios to re-check ..Of course ,without the suspected VGA .

    Comment

    • Rene77
      New Member
      • Dec 2022
      • 3
      • NL

      #3
      Re: GTX 680 problems, Wrecks main board

      Thanks for the reply.
      Yes indeed many problems here.. :-(
      No chance in resetting the B85M, without memory it does beep, but when placing the memory it just does not boot., no beeps etc. just fans running.

      Comment

      • jiroy
        Badcaps Legend
        • Jun 2016
        • 2416
        • Lebanon

        #4
        Re: GTX 680 problems, Wrecks main board

        Originally posted by Rene77
        Thanks for the reply.
        Yes indeed many problems here.. :-(
        No chance in resetting the B85M, without memory it does beep, but when placing the memory it just does not boot., no beeps etc. just fans running.
        Welcome friend .. check if the battery bios voltage is more than at least 2.8 volts , try another memory module , keep the board running for many hours , and then try again .

        Comment

        Related Topics

        Collapse

        • jb_Bak
          Sony xbr-65x900c main board issues?
          by jb_Bak
          Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

          Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
          Power Board Connector that goes to Main board
          CN6401
          Pin 01 NC
          Pin 02 NC
          Pin 03 "BL_ON": 0V
          Pin 04 "N/C"
          Pin 05 "STBY 3.3V": 3.5V
          Pin 06 "GND": N/C
          Pin 07 "AC_OFF"...
          09-27-2021, 04:52 PM
        • JDC
          (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
          by JDC
          ONN 100012588
          Issue: No Power, Then Rebooting After Main Board Change

          Short answer: replace main board and power board
          Technical answer: replace main board and Q306 & Q307 on power board.

          Long answer:

          TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
          07-15-2022, 07:39 AM
        • m1ch43lzm
          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
          by m1ch43lzm
          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
          05-12-2025, 08:37 PM
        • cheeky2
          Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
          by cheeky2
          I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
          Obviously the same LVDS connector for the screen connection...
          05-25-2024, 03:27 AM
        • advant
          Driving a Sharp TCON/panel with a universal main board
          by advant
          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
          02-03-2020, 12:25 AM
        • Loading...
        • No more items.
        Working...