I use an "ADSL Nation XTE-2005" to separate my DSL/Broadband signals from my POTS Voice signals.
I would like to replace the two capacitors on it that I suspect keep failing - the real issue being the frequency separation and filtering performance (ADSL connection speed) of the "XTE-2005" increasingly ebbs away long before you replace it when it finally dies (sudden audible noise on voice telephone calls).
The Capacitor values are proving difficult for me to find a superior replacement for they are: -
1. C4 1uF 100 Volt "NP" (Presumably Non-Polarized) -40+105°c
2. C5 1.8uF 250 Volt "NP" (Presumably Non-Polarized) -40+105°c
Here is a link showing the XTE-2005 design with other ADSL Filters and Splitters http://www.adslnation.com/support/filters.php
Here are some close-up photographs showing the markings and values of the capacitors I am talking about
I would like to replace the two capacitors on it that I suspect keep failing - the real issue being the frequency separation and filtering performance (ADSL connection speed) of the "XTE-2005" increasingly ebbs away long before you replace it when it finally dies (sudden audible noise on voice telephone calls).
The Capacitor values are proving difficult for me to find a superior replacement for they are: -
1. C4 1uF 100 Volt "NP" (Presumably Non-Polarized) -40+105°c
2. C5 1.8uF 250 Volt "NP" (Presumably Non-Polarized) -40+105°c
Here is a link showing the XTE-2005 design with other ADSL Filters and Splitters http://www.adslnation.com/support/filters.php
Here are some close-up photographs showing the markings and values of the capacitors I am talking about
Comment