It should, in theory, work, but doesn't. Family member's IPv6 on Comcast works, but they use one of the SMC All-in-one routers provided by Comcast. I would of course never use a rented router! No control, plus I got my SB6120 and WNDR3700 at work for like $15 I think lol.
-
-
Re: IPv6 - Comcast, Motorola SB6120, Netgear WNDR3700
I have been out of the CPE area for at least a dog year, but I'm surprised that IPv6 is being deployed to the customer home?--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---
-
Got an old Motorola page out controller here. Something honking old. Came in as no workie. Without schematic or anything. So I did some probing around and found two 14 pin DIP IC's that I need an replacement for.
Motorola 22F43
Motorola 22F44
Got no idea what these are.I got semi lucky and found a 22F44 on a donor. Unfortunately the 22F43 is already missing. If anybody knows what these are and find a cross would be greatly appreciated! -
Hello everyone,
I am looking for a schematic of the netgear WN2500RP repeater.
best regards -
Got a bunch of Motorola Minitor V pagers from Fire Departments here trying to fix some out of the non working ones. These pagers are known for either no sound / audio or they don’t charge. The internet is full of suggestions like metal shavings inside the speaker?
Anyway so I took one of the Minitor’s apart for my amusement in order to see why that is and nobody can fix em.
There are no service manuals or schematics for these that I know of. However… I did find the problem!
On the main board of this unit where the speaker connects to there is a metal shield.... -
Looking for schematics for Netgear Nighthawk c7500
The markings on the board say
tmt YAML 1 94V-0
e114139
1806
03-20-2025, 11:58 AM -
I got a free Netgear JGS516PE PoE switch and it works fine but the fan makes a grinding sound.
It uses a 12V 3 pin fan with a non standard pin out. So I took a Noctua fan and moved the wires around in the connector to make it work.
Unfortunately, the fan spins for just a couple seconds before it turns off and the Fan Fault LED comes on.
I think it's stupid they designed it to stop powering the fan when it detects a fault but I guess that's what they chose to do.
Instead of spending $30 on the correct replacement fan, does anyone have a clean...
Comment